AutoCodes.com
Login with Google
AutoCodes – Chevrolet – P11BF 2015 Chevrolet Silverado

P11BF 2015 Chevrolet Silverado Code - O2 Reference Voltage Circuit Low Voltage (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P11BF 2015 Chevrolet Silverado indicates O2 Reference Voltage Circuit Low Voltage (NOx Sensor 2).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 417
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11BF 2015 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P11BF 2015 Chevrolet Silverado - O2 Reference Voltage Circuit Low Voltage (NOx Sensor 2) - AutoCodes.com
P11BF 2015 Chevrolet Silverado Code - O2 Reference Voltage Circuit Low Voltage (NOx Sensor 2)
What does this mean?

What are the Possible Causes of the DTC P11BF 2015 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11BF 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11BF 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11BF 2015 Chevrolet Silverado code?

Need more information on how to fix the P11BF 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11BF 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11BF 2015 Chevrolet Silverado Code

1. What does the OBDII code P11BF mean on a 2015 Chevrolet Silverado?

P11BF indicates a problem with the O2 reference voltage circuit for NOx Sensor 2, specifically a low voltage condition.

2. What are the common symptoms of the P11BF code on a 2015 Chevrolet Silverado?

Common symptoms include a Check Engine Light, reduced fuel efficiency, poor engine performance, or the vehicle entering limp mode.

3. What causes the P11BF code to trigger in a 2015 Chevrolet Silverado?

Causes may include a faulty NOx Sensor 2, damaged wiring or connectors, a malfunctioning ECM, or corrosion in the sensor's electrical circuit.

4. Can I drive my 2015 Chevrolet Silverado with the P11BF code?

Driving with this code is not recommended as it can lead to reduced performance, higher emissions, and potential damage to the emissions system.

5. How do I diagnose the P11BF code on a 2015 Chevrolet Silverado?

Diagnosis involves scanning for codes, inspecting the NOx Sensor 2 and its wiring for damage, and testing the sensor's reference voltage with a multimeter.

6. How do I fix the P11BF code on my 2015 Chevrolet Silverado?

Repairs may include replacing NOx Sensor 2, repairing or replacing damaged wiring or connectors, or updating/reprogramming the ECM if needed.

7. How much does it cost to repair the P11BF code on a 2015 Chevrolet Silverado?

The cost can vary, but replacing the NOx sensor typically ranges from $300 to $800, including parts and labor, depending on the repair shop.

8. Can a dirty or clogged exhaust system cause the P11BF code?

While uncommon, excessive soot buildup in the exhaust system could affect the NOx sensor's performance and trigger the code.

9. Will clearing the P11BF code with a scan tool fix the problem permanently?

No, clearing the code will only reset the Check Engine Light temporarily. The underlying issue must be resolved to prevent the code from returning.

10. Is the P11BF code related to emissions testing?

Yes, the P11BF code affects the emissions system and may cause your vehicle to fail an emissions test if not repaired.

Discuss the causes and fixes for P11BF 2015 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P11BF 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play