AutoCodes – GMC – P11BE 2014 GMC Sierra

P11BE 2014 GMC Sierra Code - O2 Reference Voltage Circuit (NOx Sensor 2)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P11BE 2014 GMC Sierra indicates O2 Reference Voltage Circuit (NOx Sensor 2).
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 157

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P11BE 2014 GMC Sierra Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P11BE 2014 GMC Sierra - O2 Reference Voltage Circuit (NOx Sensor 2) - AutoCodes.com — P11BE 2014 GMC Sierra Code - O2 Reference Voltage Circuit (NOx Sensor 2)

What does this mean?

What are the Possible Causes of the DTC P11BE 2014 GMC Sierra?

Faulty Nitrogen Oxides (NOx) Sensor 2
Nitrogen Oxides Sensor 2 harness is open or shorted
Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P11BE 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P11BE 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P11BE 2014 GMC Sierra code?

Need more information on how to fix the P11BE 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P11BE 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P11BE 2014 GMC Sierra Code

1. What does the OBDII code P11BE mean on a 2014 GMC Sierra?

It indicates an issue with the O2 reference voltage circuit for NOx Sensor 2, which monitors nitrogen oxide levels in the exhaust system.

2. What are the common symptoms of a P11BE code?

Symptoms may include an illuminated check engine light, reduced fuel efficiency, poor engine performance, and potential limp mode activation.

3. What causes the P11BE code to appear?

Common causes include a faulty NOx Sensor 2, wiring or connector issues, a damaged reference voltage circuit, or a malfunctioning ECM.

4. How do I diagnose a P11BE code on my GMC Sierra?

Start by inspecting the wiring and connectors for NOx Sensor 2, checking for damage or loose connections. Use a scan tool to monitor the sensorâ€™s voltage readings and compare them to specifications.

5. Can I drive with a P11BE code?

Itâ€™s possible to drive temporarily, but ignoring the issue can lead to further damage to the emissions system and reduced engine performance.

6. How do I fix a P11BE code?

Repairs may involve replacing NOx Sensor 2, repairing damaged wiring or connectors, or updating/replacing the ECM if necessary.

7. How much does it cost to repair a P11BE code?

The cost can vary, but NOx sensor replacement typically ranges from $300 to $600, plus labor. Wiring repairs or ECM replacement can add to the cost.

8. Can a P11BE code be triggered by a software issue?

Yes, outdated or corrupted ECM software can sometimes cause this code. Reprogramming or updating the ECM may resolve the issue.

9. How do I prevent a P11BE code from recurring?

Regular maintenance, including checking sensor connections, keeping the exhaust system clean, and addressing engine issues promptly, can help prevent this code.

10. Is NOx Sensor 2 the same as an oxygen sensor?

No, NOx sensors specifically monitor nitrogen oxide levels, while oxygen sensors measure oxygen content in the exhaust. Both are part of the emissions control system.