AutoCodes.com
Login with Google
AutoCodes – Chevrolet – P119F 2014 Chevrolet Silverado

P119F 2014 Chevrolet Silverado Code - NOx Sensor 2 Signal Circuit High Voltage

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P119F 2014 Chevrolet Silverado indicates NOx Sensor 2 Signal Circuit High Voltage.
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor 2, Nitrogen Oxides Sensor 2 harness is open or shorted, Nitrogen Oxides Sensor 2 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 206
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P119F 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P119F 2014 Chevrolet Silverado - NOx Sensor 2 Signal Circuit High Voltage - AutoCodes.com
P119F 2014 Chevrolet Silverado Code - NOx Sensor 2 Signal Circuit High Voltage
What does this mean?

What are the Possible Causes of the DTC P119F 2014 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor 2
  • Nitrogen Oxides Sensor 2 harness is open or shorted
  • Nitrogen Oxides Sensor 2 circuit poor electrical connection

How to Fix the DTC P119F 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P119F 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P119F 2014 Chevrolet Silverado code?

Need more information on how to fix the P119F 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P119F 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P119F 2014 Chevrolet Silverado Code

What does the OBDII code P119F mean on a 2014 Chevrolet Silverado?

P119F indicates an issue with the NOx Sensor 2 Signal Circuit reporting high voltage, often related to the downstream nitrogen oxide (NOx) sensor's electrical or functional performance.

What are the common symptoms of the P119F code?

Symptoms include reduced engine performance, poor fuel efficiency, the Check Engine Light turning on, and in some cases, the vehicle entering limp mode.

What causes the P119F code to appear?

Common causes include a faulty downstream NOx sensor, damaged wiring or connectors, a problem with the sensor’s signal circuit, or a malfunctioning engine control module (ECM).

How do you diagnose the P119F code?

Diagnosis involves scanning for codes with an OBDII scanner, inspecting the NOx sensor wiring and connectors, testing the sensor’s output voltage, and checking for exhaust system leaks.

Can a faulty NOx sensor cause drivability issues?

Yes, a faulty NOx sensor can lead to reduced engine power, poor throttle response, and increased emissions, potentially triggering limp mode.

Is it safe to drive with a P119F code?

Driving with a P119F code is not recommended, as it can lead to higher emissions, reduced fuel economy, and long-term damage to the emissions system.

How do you fix the P119F code?

Repairs may include replacing the downstream NOx sensor, repairing damaged wiring or connectors, updating the ECM software, or addressing exhaust system leaks.

What tools are needed to fix the P119F issue?

Common tools include an OBDII scanner, a multimeter for testing voltage, and basic hand tools for sensor removal and wiring repairs.

How much does it cost to fix a P119F code?

Costs vary but can range from $200 to $700, depending on whether the NOx sensor needs replacement or if it’s a wiring repair.

Can a software update clear the P119F code?

In some cases, an ECM software update may resolve the issue if it’s caused by incorrect sensor calibration or a known software bug.

Discuss the causes and fixes for P119F 2014 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P119F 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play