AutoCodes – Generic – P1199

P1199 Code - O2S Heater Circuit Bank 2 Sensor 2 Electrical Malfunction

Quick Answer

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty O2 Sensor, O2 Sensor harness is open or shorted, O2 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1199 indicates O2S Heater Circuit Bank 2 Sensor 2 Electrical Malfunction.
Common causes: Common causes include Faulty O2 Sensor, O2 Sensor harness is open or shorted, O2 Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,441

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1199 Description

Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. The faster the heated oxygen sensor reaches that temperature the faster the sensor will start sending an accurate signal to the Engine Control Module (ECM).
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.

OBDII Code P1199 - O2S Heater Circuit Bank 2 Sensor 2 Electrical Malfunction - AutoCodes.com — P1199 Code - O2S Heater Circuit Bank 2 Sensor 2 Electrical Malfunction

What does this mean?

What are the Possible Causes of the DTC P1199?

Faulty O2 Sensor
O2 Sensor harness is open or shorted
O2 Sensor circuit poor electrical connection

How to Fix the DTC P1199?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1199 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1199 code?

Need more information on how to fix the P1199 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1199 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P1199 Audi — O2S Heater Circuit Bank 2 Sensor 2 Electrical Malfunction
P1199 Chrysler — Radiator Temp Sensor Input Too Low
P1199 Dodge — Radiator Temp Sensor Input Too Low
P1199 Volkswagen — O2S Heater Circuit Bank 2 Sensor 2 Electrical Malfunction

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.