AutoCodes – Chevrolet – P1193 2016 Chevrolet Silverado

P1193 2016 Chevrolet Silverado Code - O2 Low Reference Circuit Low Voltage (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1193 2016 Chevrolet Silverado indicates O2 Low Reference Circuit Low Voltage (NOx Sensor 1).
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 242

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1193 2016 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P1193 2016 Chevrolet Silverado - O2 Low Reference Circuit Low Voltage (NOx Sensor 1) - AutoCodes.com — P1193 2016 Chevrolet Silverado Code - O2 Low Reference Circuit Low Voltage (NOx Sensor 1)

What does this mean?

What are the Possible Causes of the DTC P1193 2016 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P1193 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1193 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1193 2016 Chevrolet Silverado code?

Need more information on how to fix the P1193 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1193 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1193 2016 Chevrolet Silverado Code

What does the OBDII code P1193 mean for a 2016 Chevrolet Silverado?

P1193 indicates an issue with the O2 Low Reference Circuit Low Voltage for NOx Sensor 1, suggesting the sensor's reference voltage is below the expected range.

What are the common symptoms of code P1193 in a 2016 Chevrolet Silverado?

Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, or difficulty passing emissions tests.

What causes the P1193 code to appear in a 2016 Chevrolet Silverado?

Common causes include a faulty NOx sensor, damaged wiring or connectors, corrosion in the circuit, or a malfunctioning engine control module (ECM).

Is it safe to drive a 2016 Chevrolet Silverado with the P1193 code active?

While the vehicle may still be drivable, ignoring the issue can lead to decreased performance, higher emissions, and potential damage to other components.

How can I fix the P1193 code on a 2016 Chevrolet Silverado?

Repairs may involve inspecting and repairing wiring or connectors, cleaning corrosion, replacing the NOx sensor, or reprogramming/replacing the ECM if necessary.

How do I diagnose the P1193 code on a 2016 Chevrolet Silverado?

Diagnosis involves using an OBDII scanner to confirm the code, inspecting the NOx sensor and wiring for damage, and testing the circuit's voltage and ground connections.

Can a bad NOx sensor cause other issues in a 2016 Chevrolet Silverado?

Yes, a faulty NOx sensor can lead to poor engine performance, increased emissions, and potentially damage the catalytic converter over time.

What tools are needed to troubleshoot the P1193 code?

Basic tools include an OBDII scanner, a multimeter for voltage and resistance testing, and possibly a wiring diagram for the NOx sensor circuit.

How much does it cost to fix the P1193 code on a 2016 Chevrolet Silverado?

The cost varies depending on the repair, with NOx sensor replacement typically ranging from $300 to $800, while wiring repairs may cost less.

Can a software update fix the P1193 code on a 2016 Chevrolet Silverado?

In some cases, an ECM software update may resolve the issue if the problem is related to incorrect programming, but this is less common than hardware-related causes.