P1187 Ford Code - Variant Selection
Quick Answer
P1187 Ford indicates Variant Selection. Common causes for P1187 Ford include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1187 Ford indicates Variant Selection.
- Common causes
- Common causes for P1187 Ford include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1187 Ford Description
How to Fix the DTC P1187 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1187 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1187 Ford code?
Need more information on how to fix the P1187 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1187 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1187 Ford Code
1. What are the common symptoms of OBDII code P1187 in a Ford vehicle?
- Common symptoms include rough idling, poor engine performance, hesitation during acceleration, and potential stalling.
2. What does OBDII code P1187 in a Ford indicate?
- OBDII code P1187 typically indicates a fault related to Variant Selection in the fuel control system.
3. What are the possible causes of OBDII code P1187 in a Ford?
- Potential causes include a faulty fuel pressure sensor, issues with the fuel injection system, vacuum leaks, or a malfunctioning fuel pump.
4. How can I diagnose the OBDII code P1187 in my Ford?
- Diagnosing this code usually involves performing a thorough inspection of the fuel system components, checking for vacuum leaks, and using a diagnostic scan tool to analyze data.
5. Can I continue driving my Ford with OBDII code P1187 present?
- It is not recommended to drive your vehicle with this code present, as it can lead to further engine damage and decreased fuel efficiency.
6. How can I repair OBDII code P1187 in my Ford?
- Repairing this code may involve replacing a faulty fuel pressure sensor, repairing any vacuum leaks, cleaning or replacing fuel injectors, or addressing issues with the fuel pump.
7. Will resetting the OBDII code P1187 in my Ford make it go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to return.
8. Can a DIY enthusiast fix OBDII code P1187 in a Ford?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair this code, but it is recommended to seek professional help for accurate diagnosis and repair.
9. Are there any preventive measures to avoid OBDII code P1187 in a Ford?
- Regular maintenance of the fuel system, such as fuel filter replacements and system inspections, can help prevent issues that may trigger this code.
10. How long does it usually take to repair OBDII code P1187 in a Ford?
- The repair time can vary depending on the exact cause of the code and the complexity of the repair needed. It is advisable to consult a mechanic for a more accurate estimate.
Discuss the causes and fixes for P1187 Ford OBDII Code
-
06 lincolin mark with a 5.4 triton customer c/o shutter or a shakey loss of power, and check engine lite comes this happens intermit. code P1187 EOT out of range (oil is getting hot) changed oil and replaced thermostat to see if it would change-nope
-
Ford Fiesta TDCI. No parts has been replaced. We repaired can wires that had tracking system wires connected to it. Swithes warning light on in instument cluster ( yellow round light with exclamation mark inside the circle). Before we repaired the can wires it would go into limp mode intermittandly. Switch ign off & on and you can drive again.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
