What are the Possible Causes of the DTC P1184 Lincoln?
NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
Engine not at operating temperature
Cooling system problem of stuck thermostat
Faulty Engine Oil Temperature (EOT) sensor
Engine Oil Temperature (EOT) sensor harness is open or shorted
Engine Oil Temperature (EOT) sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)
⚠ Does your Lincoln have Safety Recalls? → Check here
How to Fix the DTC P1184 Lincoln?
Review the 'Possible Causes' mentioned above and visually examine the corresponding wiring harness and connectors. Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
Search for P1184 Lincoln Questions and Answers: Search here →
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1184 Lincoln code, it typically requires 1.0 hour of labor. The specific diagnosis time and labor rates at auto repair shops can differ based on factors such as the location, make and model of the vehicle, and even the engine type. It is common for most auto repair shops to charge between $75 and $150 per hour.
When is the Code Detected?
Indicates Engine Oil Temperature (EOT) signal was out of Self-Test range.
What are Code Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
Code P1184 Lincoln Description
The Engine Oil Temperature (EOT) sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signal to the Engine Control Module (ECM) corresponding to temperature.
Thermistor-type sensors are considered passive sensor. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow.
Voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the ECM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The EOT sensor measures the temperature of the engine oil. The sensor is typically threaded into the engine oil lubrication system. The ECM can use the EOT sensor input to determine the following:
- On variable cam timing (VCT) applications the EOT input is used to adjust the VCT control gains and logic for camshaft timing.
- The ECM can use the EOT sensor input in conjunction with other ECM inputs to determine oil degradation
- The ECM can use EOT sensor input to initiate a soft engine shutdown. To prevent engine damage from occurring as a result of high oil temperature, the ECM has the ability to initiate a soft engine shutdown. Whenever engine RPM exceeds a calibrated level for a certain period of time, the ECM will begin reducing power by disabling engine cylinders.
P1184 Lincoln Code - Engine Oil Temperature Out Of Self Test Range
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1184 Lincoln code? Have you replaced any parts? Any information is appreciated. Thanks