AutoCodes – Ford – P1184 2011 Ford Fusion

P1184 2011 Ford Fusion Code - Engine Oil Temperature Out Of Self Test Range

Quick Answer

The Engine Oil Temperature (EOT) sensor is a thermistor device in which resistance changes with temperature. Common causes include Engine not at operating temperature, Cooling system problem of stuck thermostat, Faulty Engine Oil Temperature (EOT) sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1184 2011 Ford Fusion indicates Engine Oil Temperature Out Of Self Test Range.
Common causes: Common causes include Engine not at operating temperature, Cooling system problem of stuck thermostat, Faulty Engine Oil Temperature (EOT) sensor.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,005

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1184 2011 Ford Fusion Description

The Engine Oil Temperature (EOT) sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signal to the Engine Control Module (ECM) corresponding to temperature.
Thermistor-type sensors are considered passive sensor. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow.
Voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the ECM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The EOT sensor measures the temperature of the engine oil. The sensor is typically threaded into the engine oil lubrication system. The ECM can use the EOT sensor input to determine the following:
- On variable cam timing (VCT) applications the EOT input is used to adjust the VCT control gains and logic for camshaft timing.
- The ECM can use the EOT sensor input in conjunction with other ECM inputs to determine oil degradation
- The ECM can use EOT sensor input to initiate a soft engine shutdown. To prevent engine damage from occurring as a result of high oil temperature, the ECM has the ability to initiate a soft engine shutdown. Whenever engine RPM exceeds a calibrated level for a certain period of time, the ECM will begin reducing power by disabling engine cylinders.

OBDII Code P1184 2011 Ford Fusion - Engine Oil Temperature Out Of Self Test Range - AutoCodes.com — P1184 2011 Ford Fusion Code - Engine Oil Temperature Out Of Self Test Range

What does this mean?

What are the Possible Causes of the DTC P1184 2011 Ford Fusion?

Engine not at operating temperature
Cooling system problem of stuck thermostat
Faulty Engine Oil Temperature (EOT) sensor
Engine Oil Temperature (EOT) sensor harness is open or shorted
Engine Oil Temperature (EOT) sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1184 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1184 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1184 2011 Ford Fusion code?

Need more information on how to fix the P1184 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1184 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1184 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P1184 in a 2011 Ford Fusion?

The common symptoms of OBDII code P1184 in a 2011 Ford Fusion include the check engine light illuminating on the dashboard and potential issues with engine performance.

2. What does the OBDII code P1184 "Engine Oil Temperature Out Of Self Test Range" mean for a 2011 Ford Fusion?

This code indicates that the engine oil temperature is not within the expected range during the self-test process in a 2011 Ford Fusion.

3. What are the possible causes of OBDII code P1184 in a 2011 Ford Fusion?

Possible causes of OBDII code P1184 in a 2011 Ford Fusion include a faulty engine oil temperature sensor, wiring issues, or problems with the engine control module.

4. How can I diagnose the OBDII code P1184 in my 2011 Ford Fusion?

Diagnosing OBDII code P1184 in a 2011 Ford Fusion typically involves using an OBDII scanner to retrieve the code, checking the engine oil temperature sensor and related wiring for faults, and testing the engine control module.

5. Is it safe to continue driving my 2011 Ford Fusion with OBDII code P1184 present?

It is not recommended to continue driving your 2011 Ford Fusion with OBDII code P1184 present, as it can lead to potential engine issues and reduced performance.

6. Can I reset OBDII code P1184 in my 2011 Ford Fusion by disconnecting the battery?

While disconnecting the battery may clear the code temporarily, it is not a recommended method to fix OBDII code P1184 in a 2011 Ford Fusion. Proper diagnosis and repair of the underlying issue are necessary.

7. How can I repair OBDII code P1184 in my 2011 Ford Fusion?

Repairing OBDII code P1184 in a 2011 Ford Fusion involves replacing a faulty engine oil temperature sensor, repairing any damaged wiring, or addressing issues with the engine control module as needed.

8. Can a DIY enthusiast fix OBDII code P1184 in a 2011 Ford Fusion?

DIY enthusiasts with knowledge of automotive systems and access to the necessary tools may be able to fix OBDII code P1184 in a 2011 Ford Fusion by following repair guides and procedures.

9. Will OBDII code P1184 in my 2011 Ford Fusion cause permanent damage if left unresolved?

If left unresolved, OBDII code P1184 in a 2011 Ford Fusion can potentially cause issues with engine performance and lead to further damage over time. It is advisable to address the code promptly.

10. How much does it typically cost to repair OBDII code P1184 in a 2011 Ford Fusion at a professional mechanic or dealership?

The cost of repairing OBDII code P1184 in a 2011 Ford Fusion can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor at a professional mechanic or dealership.