AutoCodes
 
OBDII Code List
 
P1184 1999 FORD F150

P1184 1999 FORD F150 - Engine Oil Temperature Out Of Self Test Range

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3   
Comments  |  Add Comment

P1184 1999 FORD F150 Possible Causes

  • Engine not at operating temperature.
  • Cooling system problem of stuck thermostat.
  • Faulty Engine Oil Temperature (EOT) sensor
  • Engine Oil Temperature (EOT) sensor harness is open or shorted
  • Engine Oil Temperature (EOT) sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM).

First diagnose P1184 1999 FORD F150 code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1184 1999 FORD F150 code

    Labor: 1.0

    The cost of diagnosing the P1184 1999 FORD F150 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1184 1999 FORD F150 code detected?

Indicates Engine Oil Temperature (EOT) signal was out of Self-Test range.

P1184 1999 FORD F150 Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1184 1999 Ford F150 Description

The Engine Oil Temperature (EOT) sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signal to the Engine Control Module (ECM) corresponding to temperature.
Thermistor-type sensors are considered passive sensor. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow.
Voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the ECM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The EOT sensor measures the temperature of the engine oil. The sensor is typically threaded into the engine oil lubrication system. The ECM can use the EOT sensor input to determine the following:
- On variable cam timing (VCT) applications the EOT input is used to adjust the VCT control gains and logic for camshaft timing.
- The ECM can use the EOT sensor input in conjunction with other ECM inputs to determine oil degradation
- The ECM can use EOT sensor input to initiate a soft engine shutdown. To prevent engine damage from occurring as a result of high oil temperature, the ECM has the ability to initiate a soft engine shutdown. Whenever engine RPM exceeds a calibrated level for a certain period of time, the ECM will begin reducing power by disabling engine cylinders.
OBDII Code P1184 1999 Ford F150 - Engine Oil Temperature Out Of Self Test Range - AutoCodes.com

P1184 1999 FORD F150 More Information

Need more information on how to fix the P1184 1999 FORD F150 code?
Get Access to Factory Service Manuals

Need more help?

Get the P1184 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area

Related Information

P1184 1999 FORD F150 Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1184 1999 Ford F150 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧