AutoCodes – Chevrolet – P116F 2018 Chevrolet Silverado

P116F 2018 Chevrolet Silverado Code - O2 Pump Current Control Circuit High Voltage (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P116F 2018 Chevrolet Silverado indicates O2 Pump Current Control Circuit High Voltage (NOx Sensor 1).
Common causes: Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 253

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 24, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P116F 2018 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.

OBDII Code P116F 2018 Chevrolet Silverado - O2 Pump Current Control Circuit High Voltage (NOx Sensor 1) - AutoCodes.com — P116F 2018 Chevrolet Silverado Code - O2 Pump Current Control Circuit High Voltage (NOx Sensor 1)

What does this mean?

What are the Possible Causes of the DTC P116F 2018 Chevrolet Silverado?

Faulty Nitrogen Oxides (NOx) Sensor
Nitrogen Oxides Sensor harness is open or shorted
Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P116F 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P116F 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P116F 2018 Chevrolet Silverado code?

Need more information on how to fix the P116F 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P116F 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P116F 2018 Chevrolet Silverado Code

1. What does the OBDII code P116F mean on a 2018 Chevrolet Silverado?

P116F indicates a problem with the O2 Pump Current Control Circuit High Voltage in NOx Sensor 1, suggesting an issue with the sensor or its associated wiring.

2. What are the common symptoms of P116F on a 2018 Chevrolet Silverado?

Symptoms may include the Check Engine Light turning on, reduced fuel efficiency, poor engine performance, or increased emissions.

3. What causes the P116F code to appear on a 2018 Chevrolet Silverado?

Common causes include a faulty NOx Sensor 1, damaged wiring or connectors in the sensor circuit, or issues with the Engine Control Module (ECM).

4. Can I drive my 2018 Chevrolet Silverado with the P116F code?

Driving with this code is possible but not recommended, as it may lead to reduced performance, higher emissions, and potential damage to the catalytic converter.

5. How do you diagnose the P116F code on a 2018 Chevrolet Silverado?

Diagnosis typically involves scanning for codes, inspecting the NOx sensor and wiring, checking for voltage irregularities, and testing the ECM for proper function.

6. How do you fix the P116F code on a 2018 Chevrolet Silverado?

Repairs may include replacing the faulty NOx Sensor 1, repairing damaged wiring or connectors, or reprogramming/updating the ECM if necessary.

7. How much does it cost to fix the P116F code on a 2018 Chevrolet Silverado?

Repair costs vary, but replacing a NOx sensor can range from $300 to $700, depending on parts and labor rates.

8. Can a dirty air filter cause the P116F code on a 2018 Chevrolet Silverado?

A dirty air filter is unlikely to cause this code directly, as it primarily relates to the NOx sensor circuit.

9. Is the P116F code covered under warranty for a 2018 Chevrolet Silverado?

It may be covered under the emissions warranty, depending on the vehicle's mileage and age. Check with your dealership for details.

10. What should I do if the P116F code keeps returning after repairs on my 2018 Chevrolet Silverado?

If the code persists, double-check the wiring and connectors, ensure the correct NOx sensor was installed, and verify the ECM is functioning properly.