P116F 2015 Chevrolet Silverado Code - O2 Pump Current Control Circuit High Voltage (NOx Sensor 1)
Quick Answer
The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116F 2015 Chevrolet Silverado indicates O2 Pump Current Control Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P116F 2015 Chevrolet Silverado Description
What are the Possible Causes of the DTC P116F 2015 Chevrolet Silverado?
- Faulty Nitrogen Oxides (NOx) Sensor
- Nitrogen Oxides Sensor harness is open or shorted
- Nitrogen Oxides Sensor circuit poor electrical connection
How to Fix the DTC P116F 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P116F 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P116F 2015 Chevrolet Silverado code?
Need more information on how to fix the P116F 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116F 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116F 2015 Chevrolet Silverado Code
1. What does the OBDII code P116F mean on a 2015 Chevrolet Silverado?
The P116F code indicates a problem with the O2 Pump Current Control Circuit High Voltage in NOx Sensor 1, which monitors nitrogen oxide emissions.
2. What are the symptoms of code P116F on a 2015 Chevy Silverado?
Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, and possible limp mode.
3. What causes the P116F code to appear?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning engine control module (ECM).
4. Can I drive my 2015 Silverado with the P116F code?
Driving with the P116F code is not recommended, as it may lead to increased emissions and potentially damage other engine components.
5. How do you fix the P116F code on a 2015 Chevrolet Silverado?
Fixes might include replacing the NOx sensor, repairing damaged wiring, or reprogramming or replacing the ECM if necessary.
6. How can I diagnose the P116F code?
Diagnosis typically involves scanning with an OBDII tool, inspecting the NOx sensor and its wiring for damage, and testing the circuit for proper voltage and continuity.
7. How much does it cost to repair the P116F code on a 2015 Silverado?
Repair costs vary but can range from $300 to $800 depending on parts and labor, particularly if the NOx sensor needs replacement.
8. What is the function of NOx Sensor 1 in a Chevrolet Silverado?
NOx Sensor 1 measures nitrogen oxide levels in the exhaust to help the ECM optimize emissions control and engine performance.
9. Can a software issue cause the P116F code?
Yes, outdated or corrupted ECM software can sometimes trigger the P116F code, requiring a reprogramming or update.
10. How can I prevent the P116F code from reoccurring?
Regular maintenance, such as checking and replacing the NOx sensor when needed and inspecting wiring for damage, can help prevent this issue.
Discuss the causes and fixes for P116F 2015 Chevrolet Silverado OBDII Code
Code P116F 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.