AutoCodes – Chevrolet – P116E 2014 Chevrolet Silverado

P116E 2014 Chevrolet Silverado Code - O2 Pump Current Control Circuit Low Voltage (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P116E 2014 Chevrolet Silverado indicates O2 Pump Current Control Circuit Low Voltage (NOx Sensor 1).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 252
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P116E 2014 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P116E 2014 Chevrolet Silverado - O2 Pump Current Control Circuit Low Voltage (NOx Sensor 1) - AutoCodes.com
P116E 2014 Chevrolet Silverado Code - O2 Pump Current Control Circuit Low Voltage (NOx Sensor 1)

What are the Possible Causes of the DTC P116E 2014 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor
  • Nitrogen Oxides Sensor harness is open or shorted
  • Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P116E 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P116E 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P116E 2014 Chevrolet Silverado code?

Need more information on how to fix the P116E 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P116E 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P116E 2014 Chevrolet Silverado Code

What does the OBDII code P116E mean for a 2014 Chevrolet Silverado?

The P116E code indicates an issue with the O2 Pump Current Control Circuit Low Voltage for NOx Sensor 1, which affects emissions monitoring.

What are the common symptoms of code P116E?

Symptoms may include a check engine light, reduced fuel efficiency, poor engine performance, and possible difficulty passing emissions tests.

What causes the P116E code to appear?

Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 pump circuit, or a malfunctioning ECM.

Can driving with code P116E damage my vehicle?

Driving with this code may lead to increased emissions and reduced engine efficiency, but immediate damage is unlikely unless left unresolved for an extended period.

How do I diagnose the P116E code on my Silverado?

Diagnosis involves checking the NOx sensor, inspecting circuit wiring and connectors for damage, and testing the ECM for proper functionality.

How do I fix the P116E code?

Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring, and reprogramming or replacing the ECM if necessary.

How much does it cost to repair code P116E?

Repair costs vary but may range from $200 to $600 depending on whether the NOx sensor, wiring, or ECM needs replacement.

Can a bad NOx sensor cause other issues in my Silverado?

Yes, a bad NOx sensor can lead to inaccurate fuel-air mixture adjustments, higher emissions, and reduced engine performance.

Is code P116E related to emissions compliance?

Yes, the P116E code directly impacts emissions monitoring and may prevent your vehicle from passing an emissions test.

Can I clear the P116E code without fixing the issue?

Clearing the code without addressing the problem may temporarily remove the check engine light, but the issue will likely reappear.

Discuss the causes and fixes for P116E 2014 Chevrolet Silverado OBDII Code

Code P116E 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play