AutoCodes.com
Login with Google
AutoCodes – Chevrolet – P116D 2017 Chevrolet Silverado

P116D 2017 Chevrolet Silverado Code - O2 Pump Current Control Circuit (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P116D 2017 Chevrolet Silverado indicates O2 Pump Current Control Circuit (NOx Sensor 1).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Save to My Repairs My Repairs
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 260
How popular is this code, among other codes? Low
What is this?
Table of contents Created and updated by William Orellana on Mar 24, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P116D 2017 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P116D 2017 Chevrolet Silverado - O2 Pump Current Control Circuit (NOx Sensor 1) - AutoCodes.com
P116D 2017 Chevrolet Silverado Code - O2 Pump Current Control Circuit (NOx Sensor 1)
What does this mean?

What are the Possible Causes of the DTC P116D 2017 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor
  • Nitrogen Oxides Sensor harness is open or shorted
  • Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P116D 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P116D 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P116D 2017 Chevrolet Silverado code?

Need more information on how to fix the P116D 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P116D 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P116D 2017 Chevrolet Silverado Code

1. What does the OBDII code P116D mean on a 2017 Chevrolet Silverado?

P116D indicates an issue with the O2 Pump Current Control Circuit for NOx Sensor 1, which monitors the nitrogen oxide levels in the exhaust system.

2. What are the common symptoms of code P116D in a 2017 Chevy Silverado?

Symptoms may include the check engine light turning on, decreased fuel efficiency, reduced engine performance, or issues with emissions testing.

3. What causes the P116D code to appear on a 2017 Chevrolet Silverado?

Common causes include a faulty NOx sensor, damaged wiring or connectors in the sensor’s circuit, or issues with the engine control module (ECM).

4. Can a bad NOx sensor cause the P116D code?

Yes, a malfunctioning NOx sensor is a primary cause of the P116D code, as it affects the O2 Pump Current Control Circuit.

5. How do I diagnose the P116D code on my 2017 Silverado?

Diagnose by using an OBDII scanner to confirm the code, inspecting the NOx sensor and its wiring for damage, and testing the circuit with a multimeter.

6. Can I drive my 2017 Chevrolet Silverado with the P116D code?

Driving with the P116D code is not recommended, as it can affect emissions and potentially lead to further engine or exhaust system issues.

7. How do I fix the P116D code on a 2017 Silverado?

Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring or connectors, or updating/reprogramming the ECM.

8. How much does it cost to fix the P116D code on a Chevy Silverado?

Repair costs can range from $300 to $800, depending on whether the NOx sensor or additional electrical components need replacement.

9. Does the P116D code mean my catalytic converter is bad?

Not necessarily. The code specifically relates to the NOx sensor and its circuit, but prolonged issues can affect the catalytic converter over time.

10. Can a software update fix the P116D code on a 2017 Silverado?

In some cases, a software update or reprogramming of the ECM may resolve the issue if the problem stems from incorrect control module settings.

Discuss the causes and fixes for P116D 2017 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P116D 2017 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play