AutoCodes – Chevrolet – P116C 2017 Chevrolet Silverado

P116C 2017 Chevrolet Silverado Code - O2 Signal Circuit High Voltage (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P116C 2017 Chevrolet Silverado indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 372
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P116C 2017 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P116C 2017 Chevrolet Silverado - O2 Signal Circuit High Voltage (NOx Sensor 1) - AutoCodes.com
P116C 2017 Chevrolet Silverado Code - O2 Signal Circuit High Voltage (NOx Sensor 1)

What are the Possible Causes of the DTC P116C 2017 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor
  • Nitrogen Oxides Sensor harness is open or shorted
  • Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P116C 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P116C 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P116C 2017 Chevrolet Silverado code?

Need more information on how to fix the P116C 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P116C 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P116C 2017 Chevrolet Silverado Code

What does OBDII code P116C mean on a 2017 Chevrolet Silverado?

P116C indicates a high voltage issue in the O2 signal circuit for NOx Sensor 1, which monitors nitrogen oxide emissions in the exhaust system.

What are common symptoms of code P116C?

Common symptoms include the check engine light turning on, reduced fuel efficiency, poor engine performance, and potential limp mode activation.

What causes the P116C code to appear?

Possible causes include a faulty NOx Sensor 1, damaged wiring or connectors in the O2 signal circuit, excessive exhaust contamination, or a malfunctioning engine control module (ECM).

Can a dirty exhaust system trigger the P116C code?

Yes, excessive soot or contamination in the exhaust system can affect NOx Sensor 1 and lead to this code.

How do you diagnose the P116C code?

Diagnosis involves scanning for codes with an OBDII scanner, inspecting the NOx Sensor 1 wiring and connector for damage, and testing the sensor's voltage output.

Can you drive with the P116C code active?

Driving with this code is not recommended, as it may lead to poor fuel economy, increased emissions, and potential engine damage over time.

How is the P116C code typically fixed?

Repairs may include replacing the faulty NOx Sensor 1, repairing damaged wiring or connectors, or cleaning the exhaust system to remove soot buildup.

How much does it cost to fix the P116C code?

Repair costs can range from $200 to $600, depending on whether the issue is with the sensor, wiring, or other components.

Can a software update resolve the P116C code?

In some cases, an ECM software update from the dealership may be required to address compatibility or sensor calibration issues.

What tools are needed to fix the P116C code?

Tools typically include an OBDII scanner, a multimeter for testing voltage, and basic hand tools for replacing the sensor or repairing wiring.

Discuss the causes and fixes for P116C 2017 Chevrolet Silverado OBDII Code

Code P116C 2017 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play