AutoCodes – Chevrolet – P116C 2015 Chevrolet Silverado

P116C 2015 Chevrolet Silverado Code - O2 Signal Circuit High Voltage (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P116C 2015 Chevrolet Silverado indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,442
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P116C 2015 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P116C 2015 Chevrolet Silverado - O2 Signal Circuit High Voltage (NOx Sensor 1) - AutoCodes.com
P116C 2015 Chevrolet Silverado Code - O2 Signal Circuit High Voltage (NOx Sensor 1)

What are the Possible Causes of the DTC P116C 2015 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor
  • Nitrogen Oxides Sensor harness is open or shorted
  • Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P116C 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P116C 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P116C 2015 Chevrolet Silverado code?

Need more information on how to fix the P116C 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P116C 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P116C 2015 Chevrolet Silverado Code

1. What does OBDII code P116C mean on a 2015 Chevrolet Silverado?

Code P116C indicates "O2 Signal Circuit High Voltage (NOx Sensor 1)," meaning the NOx sensor's oxygen signal circuit is detecting a higher voltage than expected.

2. What are the common symptoms of code P116C?

Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, or the truck entering limp mode.

3. What causes code P116C to appear?

Possible causes include a faulty NOx sensor, damaged wiring or connections in the sensor circuit, exhaust leaks, or issues with the engine control module (ECM).

4. Can a faulty NOx sensor cause drivability issues?

Yes, a faulty NOx sensor can lead to poor engine performance, reduced fuel economy, and emissions system malfunctions.

5. How can I diagnose the P116C code on my Silverado?

Start by inspecting the wiring and connectors to the NOx sensor for damage or corrosion. Use a scan tool to monitor sensor data and confirm the high voltage reading.

6. Is it safe to drive with code P116C active?

Driving with this code may be possible, but it can lead to increased emissions, reduced performance, and potential damage to other components in the emissions system.

7. How do I fix a P116C code on a 2015 Silverado?

Repairs may include replacing the NOx sensor, repairing damaged wiring, addressing exhaust leaks, or updating the ECM software.

8. How much does it cost to replace a NOx sensor on a 2015 Chevrolet Silverado?

The cost to replace a NOx sensor typically ranges from $400 to $700, including parts and labor, depending on the location and shop rates.

9. Can a bad NOx sensor trigger other codes besides P116C?

Yes, a failing NOx sensor may trigger additional codes related to emissions control or oxygen sensors, such as P2202 or P2203.

10. Will clearing the P116C code fix the problem?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be repaired to prevent the code from returning.

Discuss the causes and fixes for P116C 2015 Chevrolet Silverado OBDII Code

Code P116C 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play