AutoCodes
 
OBDII Code List
 
P1168 1999 HONDA CIVIC

P1168 1999 HONDA CIVIC - Air/Fuel Ratio Sensor Label Low Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3   
Comments  |  Add Comment

P1168 1999 HONDA CIVIC Possible Causes

  • Faulty Air Fuel Ratio Sensor
  • Air Fuel Ratio Sensor harness is open or shorted
  • Air Fuel Ratio Sensor circuit poor electrical connection

First diagnose P1168 1999 HONDA CIVIC code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1168 1999 HONDA CIVIC code

    Labor: 1.0

    The cost of diagnosing the P1168 1999 HONDA CIVIC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

P1168 1999 HONDA CIVIC Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1168 1999 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.
OBDII Code P1168 1999 Honda Civic - Air/Fuel Ratio Sensor Label Low Voltage - AutoCodes.com

P1168 1999 HONDA CIVIC More Information

Need more information on how to fix the P1168 1999 HONDA CIVIC code?
Get Access to Factory Service Manuals

Need more help?

Get the P1168 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area

Related Information

P1168 1999 HONDA CIVIC Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1168 1999 Honda Civic code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧