AutoCodes – Honda – P1165 1996 Honda Civic

P1165 1996 Honda Civic Code - Air/Fuel Ratio Sensor 1 Circuit Range/Performance

Quick Answer

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. Common causes include Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection, Faulty Air/Fuel Ratio Sensor 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1165 1996 Honda Civic indicates Air/Fuel Ratio Sensor 1 Circuit Range/Performance.
Common causes: Common causes include Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection, Faulty Air/Fuel Ratio Sensor 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,003

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 04, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1165 1996 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.

OBDII Code P1165 1996 Honda Civic - Air/Fuel Ratio Sensor 1 Circuit Range/Performance - AutoCodes.com — P1165 1996 Honda Civic Code - Air/Fuel Ratio Sensor 1 Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P1165 1996 Honda Civic?

Air/Fuel Ratio Sensor 1 harness is open or shorted
Air/Fuel Ratio Sensor 1 circuit poor electrical connection
Faulty Air/Fuel Ratio Sensor 1

How to Fix the DTC P1165 1996 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1165 1996 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1165 1996 Honda Civic code?

Need more information on how to fix the P1165 1996 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1165 1996 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1165 1996 Honda Civic Code

1. What are the common symptoms of OBDII code P1165 in a 1996 Honda Civic?

The common symptoms include poor fuel economy, engine misfires, rough idling, and a noticeable decrease in overall engine performance.

2. What are the possible causes of OBDII code P1165 in a 1996 Honda Civic?

The code P1165 typically indicates a problem with the Air/Fuel Ratio Sensor 1 circuit. Common causes include a faulty sensor, damaged wiring or connectors, or an issue with the engine control module.

3. How can I diagnose the OBDII code P1165 in my 1996 Honda Civic?

Diagnosis involves using an OBDII scanner to retrieve the trouble code and then inspecting the Air/Fuel Ratio Sensor 1, its wiring, and related components for any signs of damage or malfunction.

4. Can a dirty air filter trigger the OBDII code P1165 in a 1996 Honda Civic?

While a dirty air filter can affect engine performance, it is unlikely to directly trigger the P1165 code. However, ensuring regular air filter maintenance is still important for overall engine health.

5. Is it safe to continue driving with OBDII code P1165 in a 1996 Honda Civic?

It is not recommended to continue driving with the P1165 code present, as it can lead to further engine damage and potentially worsen performance. It is best to address the issue promptly.

6. Can I reset the OBDII code P1165 in my 1996 Honda Civic by disconnecting the battery?

Disconnecting the battery may temporarily clear the code, but it will likely reappear if the underlying issue is not resolved. It is advisable to diagnose and fix the root cause of the problem.

7. What are some repair tips for fixing OBDII code P1165 in a 1996 Honda Civic?

Repair tips include checking and replacing the Air/Fuel Ratio Sensor 1 if necessary, inspecting the wiring and connectors for damage, and ensuring proper connections and sensor operation.

8. How much does it typically cost to repair OBDII code P1165 in a 1996 Honda Civic?

The cost of repairing the P1165 code can vary depending on the specific issue causing it. Costs may include sensor replacement, wiring repairs, or potential labor charges if professional help is needed.

9. Can a DIY enthusiast fix OBDII code P1165 in a 1996 Honda Civic?

Depending on the DIY enthusiast's skill level and access to tools, fixing the P1165 code may be possible by following repair guides and tutorials. However, seeking professional help is recommended for accurate diagnosis and repair.

10. How often should I check the Air/Fuel Ratio Sensor 1 in my 1996 Honda Civic to prevent OBDII code P1165?

Regular maintenance checks, such as during routine tune-ups or when experiencing symptoms like poor fuel economy, can help prevent issues with the Air/Fuel Ratio Sensor 1 and potentially avoid triggering the P1165 code.