P1164 MINI Code - Fuel Trim Additve Per Ignition Bank 2 Low
Quick Answer
P1164 MINI indicates Fuel Trim Additve Per Ignition Bank 2 Low. Common causes for P1164 MINI include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1164 MINI indicates Fuel Trim Additve Per Ignition Bank 2 Low.
- Common causes
- Common causes for P1164 MINI include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1164 MINI Description
How to Fix the DTC P1164 MINI?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1164 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1164 MINI code?
Need more information on how to fix the P1164 MINI code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1164 MINI code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1164 MINI Code
What does the OBDII code P1164 mean for MINI vehicles?
P1164 indicates a low fuel trim additive per ignition on Bank 2, suggesting the engine is running lean on that side.
What are common symptoms of code P1164 in a MINI?
Symptoms may include reduced fuel efficiency, rough idling, hesitation during acceleration, or the check engine light turning on.
What causes code P1164 in MINI cars?
Common causes include a vacuum leak, faulty oxygen sensor, clogged fuel injectors, or issues with the mass airflow sensor.
How can I diagnose code P1164 on my MINI?
Use an OBDII scanner to confirm the code, check for vacuum leaks, inspect the oxygen sensor, and test the fuel injectors for proper operation.
Can a dirty mass airflow sensor trigger code P1164?
Yes, a dirty or malfunctioning mass airflow sensor can cause improper air-fuel mixture readings, leading to a lean condition and triggering this code.
How do I fix code P1164 on my MINI?
Repairs may involve fixing vacuum leaks, replacing the oxygen sensor, cleaning or replacing fuel injectors, and servicing the mass airflow sensor.
Is it safe to drive with code P1164 on my MINI?
Driving with this code can lead to engine performance issues and potential damage over time, so it’s best to address the problem promptly.
Can a fuel system issue cause code P1164?
Yes, a clogged fuel injector or low fuel pressure can result in a lean condition, contributing to this code's appearance.
How does a vacuum leak affect code P1164?
A vacuum leak allows excess air into the system, causing the air-fuel ratio to lean out and triggering this code.
Will replacing the oxygen sensor always fix code P1164?
Not necessarily; while a faulty oxygen sensor may be the cause, other issues like vacuum leaks or fuel system problems should also be ruled out.
Discuss the causes and fixes for P1164 MINI OBDII Code
Code P1164 MINI comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
