AutoCodes – Honda – P1164 1999 Honda Civic

P1164 1999 Honda Civic Code - Air/Fuel Ratio Sensor 1 Range/Performance Problem

Quick Answer

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1164 1999 Honda Civic indicates Air/Fuel Ratio Sensor 1 Range/Performance Problem.
Common causes: Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,190

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1164 1999 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.

OBDII Code P1164 1999 Honda Civic - Air/Fuel Ratio Sensor 1 Range/Performance Problem - AutoCodes.com — P1164 1999 Honda Civic Code - Air/Fuel Ratio Sensor 1 Range/Performance Problem

What does this mean?

What are the Possible Causes of the DTC P1164 1999 Honda Civic?

Faulty Air/Fuel Ratio Sensor 1
Air/Fuel Ratio Sensor 1 harness is open or shorted
Air/Fuel Ratio Sensor 1 circuit poor electrical connection

How to Fix the DTC P1164 1999 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1164 1999 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1164 1999 Honda Civic code?

Need more information on how to fix the P1164 1999 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1164 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1164 1999 Honda Civic Code

1. What are common symptoms of OBDII code P1164 in a 1999 Honda Civic?

- Common symptoms include poor fuel economy, rough idling, hesitation during acceleration, and the illumination of the check engine light.

2. What does the OBDII code P1164 in a 1999 Honda Civic indicate?

- This code indicates a range/performance problem with Air/Fuel Ratio Sensor 1 (Bank 1).

3. What are possible causes of the P1164 code in a 1999 Honda Civic?

- Possible causes include a faulty air/fuel ratio sensor, wiring issues, vacuum leaks, exhaust system leaks, or a faulty engine control module (ECM).

4. How can I diagnose the P1164 code in my 1999 Honda Civic?

- Diagnosing the code involves using an OBDII scanner to retrieve the code, inspecting the air/fuel ratio sensor and its wiring, checking for vacuum and exhaust leaks, and testing the ECM.

5. Can I drive my 1999 Honda Civic with the P1164 code?

- It is not recommended to drive your vehicle with the P1164 code as it can lead to poor engine performance and potentially cause further damage.

6. How do I repair the P1164 code in my 1999 Honda Civic?

- Repairing the P1164 code may involve replacing the air/fuel ratio sensor, repairing any wiring issues, fixing vacuum or exhaust leaks, or reprogramming the ECM.

7. Will resetting the check engine light fix the P1164 code in my 1999 Honda Civic?

- Simply resetting the check engine light will not fix the underlying issue causing the P1164 code. Proper diagnosis and repair are necessary to resolve the problem.

8. How much does it cost to repair the P1164 code in a 1999 Honda Civic?

- The cost of repairing the P1164 code can vary depending on the root cause of the issue, but it may involve parts and labor costs ranging from $200 to $500 or more.

9. Can I repair the P1164 code in my 1999 Honda Civic myself?

- If you have the necessary tools, knowledge, and experience, you may be able to repair the P1164 code yourself. However, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

10. How long does it take to repair the P1164 code in a 1999 Honda Civic?

- The repair time for the P1164 code can vary based on the specific issue causing the code and the expertise of the person performing the repair. It may take anywhere from 1 to 4 hours or more to complete the repair.