AutoCodes – Honda – P1164 1997 Honda Civic

P1164 1997 Honda Civic Code - Air/Fuel Ratio Sensor 1 Range/Performance Problem

Quick Answer

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1164 1997 Honda Civic indicates Air/Fuel Ratio Sensor 1 Range/Performance Problem.
Common causes: Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,162

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1164 1997 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.

OBDII Code P1164 1997 Honda Civic - Air/Fuel Ratio Sensor 1 Range/Performance Problem - AutoCodes.com — P1164 1997 Honda Civic Code - Air/Fuel Ratio Sensor 1 Range/Performance Problem

What does this mean?

What are the Possible Causes of the DTC P1164 1997 Honda Civic?

Faulty Air/Fuel Ratio Sensor 1
Air/Fuel Ratio Sensor 1 harness is open or shorted
Air/Fuel Ratio Sensor 1 circuit poor electrical connection

How to Fix the DTC P1164 1997 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1164 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1164 1997 Honda Civic code?

Need more information on how to fix the P1164 1997 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1164 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1164 1997 Honda Civic Code

1. What are the common symptoms of OBDII code P1164 in a 1997 Honda Civic?

- Common symptoms include poor fuel economy, rough idling, engine misfires, and a noticeable decrease in overall performance.

2. What are the possible causes of the OBDII code P1164 in a 1997 Honda Civic?

- The code P1164 typically indicates a malfunction in the Air/Fuel Ratio Sensor 1, which can be caused by issues such as a faulty sensor, wiring problems, or a vacuum leak.

3. How can I diagnose the OBDII code P1164 in my 1997 Honda Civic?

- Diagnosing the code P1164 involves using an OBDII scanner to retrieve the code, inspecting the sensor and its wiring for any visible damage, and performing a voltage test to confirm sensor operation.

4. Can I still drive my 1997 Honda Civic with the OBDII code P1164?

- It is not recommended to drive your vehicle with the code P1164, as it can lead to further damage and decreased engine performance. It's best to address the issue promptly.

5. How can I repair the OBDII code P1164 in my 1997 Honda Civic?

- Repairing the code P1164 may involve replacing the Air/Fuel Ratio Sensor 1, repairing any damaged wiring, fixing vacuum leaks, or resetting the ECU to clear the code.

6. Will resetting the OBDII code P1164 in my 1997 Honda Civic fix the issue permanently?

- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the code is not addressed, it is likely to reappear. Proper diagnosis and repair are necessary for a permanent fix.

7. How much does it cost to repair the OBDII code P1164 in a 1997 Honda Civic?

- The cost of repairing the code P1164 can vary depending on the cause of the issue and the labor rates in your area. It's recommended to get a diagnostic from a trusted mechanic for an accurate estimate.

8. Can a DIY enthusiast fix the OBDII code P1164 in a 1997 Honda Civic?

- Depending on your skill level and access to tools, a DIY enthusiast may be able to address the code P1164 by replacing the sensor or fixing wiring issues. However, if in doubt, it's best to consult a professional mechanic.

9. How long does it take to repair the OBDII code P1164 in a 1997 Honda Civic?

- The repair time for the code P1164 can vary based on the cause of the issue and the complexity of the repair. It could take anywhere from a few hours to a full day to complete the repair.

10. What happens if I ignore the OBDII code P1164 in my 1997 Honda Civic?

- Ignoring the code P1164 can lead to decreased fuel efficiency, engine performance issues, and potential damage to other components. It's important to address the issue promptly to avoid further problems.