P1155 Scion Code - Air/Fuel Ratio Sensor Heater Circuit Malfunction Bank 2 Sensor 1
Quick Answer
Air-Fuel Ratio (A/F)sensor need to reach a minimum operating temperature of 1200 degrees F to produce an accurate voltage signal. Common causes include Faulty Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open or shorted, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1155 Scion indicates Air/Fuel Ratio Sensor Heater Circuit Malfunction Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open or shorted, Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1155 Scion Description
In order to achieve the require temperature, a heater element is included inside the air-fuel ratio sensor. The ECM controls the air-fuel ratio sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P1155 Scion?
- Faulty Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1
- Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 harness is open or shorted
- Air-Fuel Ratio (A/F) Sensor Bank 2 Sensor 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1155 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1155 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1155 Scion code?
Need more information on how to fix the P1155 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1155 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1155 Scion Code
No Frequently Asked Questions about P1155 Scion Code found.
Discuss the causes and fixes for P1155 Scion OBDII Code
Code P1155 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.