P1146 2003 NISSAN ALTIMA SEDAN - Heated Oxygen Sensor 2 Minimum Voltage Monitoring Bank 1
P1146 2003 NISSAN ALTIMA SEDAN Possible Causes
- Faulty heated oxygen (O2) sensor 2 (rear)
- Intake air leaks
- Heated oxygen (O2) sensor 2 (rear) harness is open or shorted
- Heated oxygen (O2) sensor 2 (rear) circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
How do I fix code P1146 2003 NISSAN ALTIMA SEDAN?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
Cost of diagnosing the P1146 2003 NISSAN ALTIMA SEDAN code
Labor: 1.0The cost of diagnosing the P1146 2003 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
P1146 2003 NISSAN ALTIMA SEDAN DescriptionThe Heated Oxygen Sensor 2 (HO2S) (Rear O2 Sensor), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
More InformationNeed more information on how to fix the P1146 2003 NISSAN ALTIMA SEDAN code?
Get Access to Factory Service Manuals
Need more help?Get the P1146 2003 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1146 2003 Nissan Altima Sedan code? Have you replaced any parts?
Any information is appreciated. Thanks