P1143 Subaru Code - Pressure Sensor Circuit Low Input
Quick Answer
P1143 Subaru indicates Pressure Sensor Circuit Low Input. Common causes include Faulty Pressure Sensor, Pressure Sensor harness is open or shorted, Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1143 Subaru indicates Pressure Sensor Circuit Low Input.
- Common causes
- Common causes include Faulty Pressure Sensor, Pressure Sensor harness is open or shorted, Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1143 Subaru Description
What are the Possible Causes of the DTC P1143 Subaru?
- Faulty Pressure Sensor
- Pressure Sensor harness is open or shorted
- Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1143 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1143 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1143 Subaru code?
Need more information on how to fix the P1143 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1143 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1143 Subaru Code
1. What are the common symptoms of OBDII code P1143 in a Subaru?
- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and illuminated Check Engine Light.
2. What does the OBDII code P1143 Subaru indicate?
- The code P1143 means that there is a low input signal detected from the pressure sensor circuit in the Subaru's engine.
3. What are the possible causes of the pressure sensor circuit low input in a Subaru?
- Possible causes include a faulty pressure sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. How can I diagnose the OBDII code P1143 in my Subaru?
- Diagnosing this code typically involves using a scan tool to read the code, inspecting the pressure sensor and its wiring, and checking for any related issues in the engine system.
5. Can driving with the OBDII code P1143 Subaru cause further damage to the vehicle?
- While driving with this code may not immediately cause significant damage, it is recommended to address the issue promptly to prevent potential long-term engine problems.
6. Is it safe to continue driving my Subaru with the Check Engine Light illuminated due to code P1143?
- It is generally safe to drive the vehicle with the Check Engine Light on, but it is advisable to have the issue diagnosed and repaired as soon as possible to avoid any potential complications.
7. How can I repair the pressure sensor circuit low input issue in my Subaru?
- Repair options may include replacing the pressure sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module (ECM) if necessary.
8. Are there any DIY tips for resolving the OBDII code P1143 in a Subaru?
- DIY tips include checking for loose or damaged wiring connections, ensuring the pressure sensor is securely in place, and clearing the code with a scan tool to see if it reappears.
9. Can a faulty pressure sensor be cleaned or repaired, or does it need to be replaced?
- In most cases, a faulty pressure sensor cannot be repaired and will need to be replaced with a new one to resolve the circuit low input issue.
10. How much can I expect to pay for repairs related to the OBDII code P1143 Subaru at a mechanic or dealership?
- Repair costs can vary depending on the exact cause of the issue, but expect to pay anywhere from $100 to $300 for parts and labor to address the pressure sensor circuit low input problem.
Discuss the causes and fixes for P1143 Subaru OBDII Code
Code P1143 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
