P113F 2015 GMC Sierra Code - Exhaust Gas Temperature Sensor 5 Not Plausible
Quick Answer
The exhaust gas temperature sensors are variable resistors that measure the temperature of the exhaust gas at the inlet and outlet of the diesel oxidation catalyst as well as the inlet and outlet of the Diesel Particulate Filter (DPF). Common causes include Faulty Exhaust Gas Temperature Sensor, Exhaust Gas Temperature Sensor harness is open or shorted, Exhaust Gas Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P113F 2015 GMC Sierra indicates Exhaust Gas Temperature Sensor 5 Not Plausible.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor, Exhaust Gas Temperature Sensor harness is open or shorted, Exhaust Gas Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P113F 2015 GMC Sierra Description
What are the Possible Causes of the DTC P113F 2015 GMC Sierra?
- Faulty Exhaust Gas Temperature Sensor
- Exhaust Gas Temperature Sensor harness is open or shorted
- Exhaust Gas Temperature Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P113F 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P113F 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P113F 2015 GMC Sierra code?
Need more information on how to fix the P113F 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P113F 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P113F 2015 GMC Sierra Code
1. What does the OBDII code P113F mean on a 2015 GMC Sierra?
It indicates that the exhaust gas temperature sensor 5 is sending a signal that is not consistent or plausible with expected values.
2. What are the symptoms of code P113F on a 2015 GMC Sierra?
Common symptoms include reduced engine performance, illuminated check engine light, poor fuel efficiency, and potentially entering limp mode.
3. What causes the P113F code to appear?
Possible causes include a faulty exhaust gas temperature sensor 5, wiring issues like corrosion or damage, or incorrect installation of the sensor.
4. Can I drive my 2015 GMC Sierra with code P113F?
It’s not recommended to drive for an extended period, as the issue may affect emissions and engine performance, potentially causing further damage.
5. How do I troubleshoot the P113F code?
Begin by inspecting the exhaust gas temperature sensor 5 and its wiring for damage, corrosion, or loose connections. Use a multimeter to test the sensor’s resistance and functionality.
6. How do I fix the P113F code on my GMC Sierra?
Repairs may include replacing the faulty exhaust gas temperature sensor 5, repairing or replacing damaged wiring, or cleaning corroded connections.
7. Where is exhaust gas temperature sensor 5 located on a 2015 GMC Sierra?
It is typically located in the exhaust system, downstream from the engine, but its exact position may vary depending on the engine configuration.
8. How much does it cost to fix the P113F code on a 2015 GMC Sierra?
The cost can range from $100 to $300, depending on whether only the sensor needs replacement or if additional wiring repairs are necessary.
9. Can a P113F code cause long-term damage if ignored?
Yes, ignoring this code may lead to increased emissions, damage to the catalytic converter, or decreased overall engine performance.
10. Do I need to reprogram my ECM after fixing the P113F code?
It’s typically not required, but clearing the code with an OBDII scanner after repairs ensures the system can monitor for any further issues.
Discuss the causes and fixes for P113F 2015 GMC Sierra OBDII Code
Code P113F 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
