AutoCodes – Jeep – P113E Jeep

P113E Jeep Code - Oxygen Sensor 2/1 Slow Response

Quick Answer

The Engine Control Module (ECM) monitors the Oxygen (O2) Sensor Bank 2 Sensor 1. Common causes include Faulty Oxygen (O2) Sensor 2/1, Oxygen (O2) Sensor 2/1 harness is open or shorted, Oxygen (O2) Sensor 2/1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P113E Jeep indicates Oxygen Sensor 2/1 Slow Response.
Common causes: Common causes include Faulty Oxygen (O2) Sensor 2/1, Oxygen (O2) Sensor 2/1 harness is open or shorted, Oxygen (O2) Sensor 2/1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,633

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 25, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P113E Jeep Description

The Engine Control Module (ECM) monitors the Oxygen (O2) Sensor Bank 2 Sensor 1. The ECM sets the OBDII code when the Oxygen (O2) Sensor Bank 2 Sensor 1 is not to factory specifications.

OBDII Code P113E Jeep - Oxygen Sensor 2/1 Slow Response - AutoCodes.com — P113E Jeep Code - Oxygen Sensor 2/1 Slow Response

What does this mean?

What are the Possible Causes of the DTC P113E Jeep?

Faulty Oxygen (O2) Sensor 2/1
Oxygen (O2) Sensor 2/1 harness is open or shorted
Oxygen (O2) Sensor 2/1 circuit poor electrical connection

How to Fix the DTC P113E Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P113E Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P113E Jeep code?

Need more information on how to fix the P113E Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P113E Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P113E Jeep Code

1. What are the common symptoms of OBDII code P113E on a Jeep related to Oxygen Sensor 2/1 Slow Response?

- Common symptoms may include decreased fuel efficiency, rough idling, engine hesitation, and an illuminated check engine light.

2. What are the possible causes of the P113E code in a Jeep indicating Oxygen Sensor 2/1 Slow Response?

- Potential causes may include a faulty oxygen sensor, issues with the oxygen sensor wiring or connections, vacuum leaks, exhaust system leaks, or a malfunctioning catalytic converter.

3. How can I diagnose the P113E code in my Jeep related to Oxygen Sensor 2/1 Slow Response?

- Diagnosing the code may involve using an OBDII scanner to retrieve the specific fault code, inspecting the oxygen sensor and its wiring for any damage, checking for exhaust or vacuum leaks, and performing a sensor response test.

4. Can driving with the P113E code in my Jeep cause further damage?

- Continuing to drive with the P113E code may lead to reduced fuel efficiency, increased emissions, potential damage to the catalytic converter, and engine performance issues.

5. How can I repair the P113E code on my Jeep related to Oxygen Sensor 2/1 Slow Response?

- Repair options may include replacing the faulty oxygen sensor, repairing damaged wiring or connections, fixing any exhaust or vacuum leaks, and addressing any underlying issues contributing to the slow sensor response.

6. Is it possible to reset the P113E code in my Jeep without addressing the underlying issue?

- While clearing the fault code may temporarily turn off the check engine light, it is recommended to address the root cause of the code to prevent further issues and ensure proper vehicle operation.

7. How much does it typically cost to repair the P113E code on a Jeep related to Oxygen Sensor 2/1 Slow Response?

- The cost of repairs can vary depending on the specific issue causing the code, the price of replacement parts, and labor costs. It is advisable to consult with a mechanic for an accurate estimate.

8. Can I drive my Jeep safely with the P113E code present?

- It is generally not recommended to drive the vehicle with a persistent check engine light, as the underlying issue could affect the vehicle's performance, emissions, and fuel efficiency. It is best to address the problem promptly.

9. Will the P113E code in my Jeep reset on its own?

- The code may reset temporarily if the issue is intermittent, but it is advisable to diagnose and repair the underlying problem to prevent the code from reappearing.

10. How often should I check the oxygen sensors in my Jeep to prevent the P113E code from occurring?

- Regular maintenance checks and inspections, typically during routine service intervals, can help detect early signs of oxygen sensor issues and prevent codes like P113E from appearing.