P113E 2014 GMC Sierra Code - Exhaust Gas Temperature Sensor 4 Not Plausible
Quick Answer
The exhaust gas temperature sensors are variable resistors that measure the temperature of the exhaust gas at the inlet and outlet of the diesel oxidation catalyst as well as the inlet and outlet of the Diesel Particulate Filter (DPF). Common causes include Faulty Exhaust Gas Temperature Sensor, Exhaust Gas Temperature Sensor harness is open or shorted, Exhaust Gas Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P113E 2014 GMC Sierra indicates Exhaust Gas Temperature Sensor 4 Not Plausible.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor, Exhaust Gas Temperature Sensor harness is open or shorted, Exhaust Gas Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P113E 2014 GMC Sierra Description
What are the Possible Causes of the DTC P113E 2014 GMC Sierra?
- Faulty Exhaust Gas Temperature Sensor
- Exhaust Gas Temperature Sensor harness is open or shorted
- Exhaust Gas Temperature Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P113E 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P113E 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P113E 2014 GMC Sierra code?
Need more information on how to fix the P113E 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P113E 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P113E 2014 GMC Sierra Code
1. What does the OBDII code P113E mean on a 2014 GMC Sierra?
P113E indicates that the Exhaust Gas Temperature (EGT) Sensor 4 is reporting values that are not plausible or inconsistent with expected readings.
2. What are the symptoms of the P113E code on a 2014 GMC Sierra?
Common symptoms include the check engine light turning on, reduced engine performance, poor fuel efficiency, and potential limp mode activation.
3. What causes the P113E code on a 2014 GMC Sierra?
Possible causes include a faulty EGT sensor 4, damaged wiring or connectors, exhaust leaks, or issues with the vehicle's PCM (Powertrain Control Module).
4. How do I diagnose the P113E code on my 2014 GMC Sierra?
Start by inspecting the wiring and connectors for damage, checking the EGT sensor 4 for proper operation, and using a scan tool to monitor sensor readings for inconsistencies.
5. Can I drive my 2014 GMC Sierra with the P113E code?
It’s not recommended to drive for extended periods with this code active, as it may cause reduced engine performance or lead to further damage to the exhaust or emissions system.
6. How do I fix the P113E code on my 2014 GMC Sierra?
Repairs may include replacing the faulty EGT sensor 4, repairing damaged wiring or connectors, fixing exhaust leaks, or reprogramming/updating the PCM if necessary.
7. How much does it cost to repair the P113E code on a 2014 GMC Sierra?
Repair costs vary but typically range between $100 and $300, depending on whether the EGT sensor needs replacement or if there are additional wiring repairs required.
8. Can a clogged diesel particulate filter (DPF) cause the P113E code?
Yes, a clogged DPF can cause abnormal exhaust gas temperatures, potentially leading to the P113E code.
9. How can I prevent the P113E code from occurring on my 2014 GMC Sierra?
Regular maintenance, such as inspecting exhaust components, ensuring proper sensor function, and addressing DPF issues promptly, can help prevent this code.
10. Do I need to reset the check engine light after fixing the P113E code?
Yes, after repairs are completed, use an OBDII scan tool to clear the code and reset the check engine light to ensure the issue is resolved.
Discuss the causes and fixes for P113E 2014 GMC Sierra OBDII Code
Code P113E 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
