Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the P113D Buick code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The exhaust gas temperature sensors are variable resistors that measure the temperature of the exhaust gas at the inlet and outlet of the diesel oxidation catalyst as well as the inlet and outlet of the Diesel Particulate Filter (DPF). The Engine Control Module (ECM) supplies a bias 5-volt signal to the exhaust gas temperature sensor signal circuit and supplies a ground to the low reference circuit. The exhaust gas temperature information is used by the ECM during the particulate filter cleaning process. The following table illustrates the relationship between the temperature of the exhaust gas and the resistance and voltage of the exhaust gas temperature sensor. The Diagnostic Trouble Code (DTC) will be set if the ECM detects an exhaust gas temperature value that is not plausible when the ignition is switched on.
Need more information on how to fix the P113D Buick code? Get Access to Factory Service Manuals
Get the P113D Buick code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P113D Buick code? Have you replaced any parts?
Any information is appreciated. Thanks