P1132 2003 NISSAN SENTRA - Swirl Control Valve Circuit
Possible causes
- Faulty Swirl Control Valve
- Swirl Control Valve harness is open or shorted
- Swirl Control Valve circuit poor electrical connection
When is the code detected?
An improper voltage signal is sent to Engine Control Module (ECM).Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1132 2003 Nissan Sentra Description
Swirl control valve consists of actuator and valve. The valve is installed in the intake manifold, and the actuator is connected to the rear end of the valve shaft.The swirl control valve uses a step motor which has four winding phases. It operates according to the output pulse signal of the Engine Control Module (ECM). Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes. When no change in the control position is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.
Need more help?
Get the P1132 2003 Nissan Sentra code diagnosed by a professional: Find a repair shop in your areaRelated Information
P1132 2003 NISSAN SENTRA Comments
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1132 2003 Nissan Sentra code? Have you replaced any parts?Any information is appreciated. Thanks