P112C BMW Code - Upstream Oxygen Sensor Open Circuit Monitoring Virtual Ground Failure or Pumping Current Failure Bank 1
Quick Answer
The oxygen sensor circuit monitoring detects the following malfunctions by evaluating the error information received from oxygen sensor monitoring functions. Common causes include Faulty Upstream Oxygen Sensor Bank 1, Upstream Oxygen Sensor Bank 1 harness is open or shorted, Upstream Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P112C BMW indicates Upstream Oxygen Sensor Open Circuit Monitoring Virtual Ground Failure or Pumping Current Failure Bank 1.
- Common causes
- Common causes include Faulty Upstream Oxygen Sensor Bank 1, Upstream Oxygen Sensor Bank 1 harness is open or shorted, Upstream Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P112C BMW Description
This function shall be triggered only if one of the following diagnosis is active (to set the readiness bit), which are 'Upstream Oxygen Sensor - Signal Monitoring During Fuel Cut-off' and 'Upstream Oxygen Sensor - Heater Monitoring'. The function shall go to the state = “active” only if one of the above diagnosis detected a fault.
An open circuit in line Virtual Ground or in the line Pumping current can be detected if the sensor signal stocks near lambda 1. The sensor non-activity can be detected by the Oxygen Sensor Signal Monitoring During Fuel Cut-off (signal voltage below e.g. 2,1 V *) in fuel cut off).
What are the Possible Causes of the DTC P112C BMW?
- Faulty Upstream Oxygen Sensor Bank 1
- Upstream Oxygen Sensor Bank 1 harness is open or shorted
- Upstream Oxygen Sensor Bank 1 circuit poor electrical connection
How to Fix the DTC P112C BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P112C BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P112C BMW code?
Need more information on how to fix the P112C BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P112C BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P112C BMW Code
1. What are the common symptoms of OBDII code P112C in a BMW?
- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and potential stalling of the vehicle.
2. What are the possible causes of the Upstream Oxygen Sensor Open Circuit Monitoring Virtual Ground Failure in a BMW?
- The causes may include a faulty oxygen sensor, damaged wiring or connectors, issues with the fuel system, or a malfunctioning engine control module.
3. How can I diagnose the Upstream Oxygen Sensor Open Circuit Monitoring Virtual Ground Failure in Bank 1?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the oxygen sensor and related wiring for damage, and performing voltage and resistance tests on the sensor.
4. Can I drive my BMW with the P112C code present?
- It is not recommended to drive your BMW with the P112C code as it can lead to further damage to the engine and emissions system.
5. How do I repair the Pumping Current Failure Bank 1 associated with code P112C?
- Repairing the Pumping Current Failure Bank 1 may involve replacing the upstream oxygen sensor, repairing or replacing damaged wiring, or addressing any underlying issues with the fuel system.
6. Is it safe to continue driving my BMW if I reset the P112C code without addressing the underlying issue?
- Resetting the code without fixing the underlying issue is not advisable as the problem may persist, leading to potential engine damage and increased emissions.
7. How much does it typically cost to repair the Upstream Oxygen Sensor Open Circuit Monitoring Virtual Ground Failure in a BMW?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars, including parts and labor.
8. What are some preventative maintenance tips to avoid encountering code P112C in the future?
- Regularly servicing your BMW, using high-quality fuel, ensuring proper installation of components, and addressing any warning signs promptly can help prevent the occurrence of code P112C.
9. Can a DIY enthusiast fix the Upstream Oxygen Sensor Open Circuit Monitoring Virtual Ground Failure in Bank 1?
- While some DIY enthusiasts may be able to replace the oxygen sensor or address simple wiring issues, diagnosing and repairing more complex underlying causes may require professional expertise.
10. How long does it take to repair the Pumping Current Failure Bank 1 associated with code P112C?
- The repair time can vary depending on the extent of the issue and the availability of parts, but it may take a few hours to a day for a mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P112C BMW OBDII Code
Code P112C BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
