AutoCodes – Ford – P1128 1999 Ford F150

P1128 1999 Ford F150 Code - Front O2 Sensor Connectors Swapped

Quick Answer

The Diagnostic Trouble Code (DTC) will set anytime the Powertrain Control Module (PCM) Detects Upstream Oxygen Sensors swapped from Bank to Bank. Common causes include Crossed HO2S Harness Connectors, Powertrain Control Module (PCM) Harness Connector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1128 1999 Ford F150 indicates Front O2 Sensor Connectors Swapped.
Common causes
Common causes include Crossed HO2S Harness Connectors, Powertrain Control Module (PCM) Harness Connector.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,816
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 03, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1128 1999 Ford F150 Description

The Diagnostic Trouble Code (DTC) will set anytime the Powertrain Control Module (PCM) Detects Upstream Oxygen Sensors swapped from Bank to Bank. Heated Exhaust Gas Oxygen (HEGO) Sensor Monitor checks & determines if the HO2S signal response for fuel shift corresponds to the correct engine bank. The code sets when HO2S being tested is not indicated.
OBDII Code P1128 1999 Ford F150 - Front O2 Sensor Connectors Swapped - AutoCodes.com
P1128 1999 Ford F150 Code - Front O2 Sensor Connectors Swapped

What are the Possible Causes of the DTC P1128 1999 Ford F150?

  • Crossed HO2S Harness Connectors
  • Powertrain Control Module (PCM) Harness Connector

How to Fix the DTC P1128 1999 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1128 1999 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1128 1999 Ford F150 code?

Need more information on how to fix the P1128 1999 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1128 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1128 1999 Ford F150 Code

1. What are the common symptoms of OBDII code P1128 in a 1999 Ford F150 related to Front O2 Sensor Connectors Swapped?

The common symptoms include poor engine performance, reduced fuel efficiency, and an illuminated Check Engine light.

2. What causes the Front O2 Sensor Connectors to be swapped in a 1999 Ford F150, triggering code P1128?

The most common cause is human error during previous sensor replacements or repairs, leading to the connectors being incorrectly swapped.

3. How can I diagnose if the Front O2 Sensor Connectors are indeed swapped in my 1999 Ford F150 triggering code P1128?

A thorough visual inspection of the sensor connectors and their corresponding locations can help confirm if they have been swapped.

4. Can I drive my 1999 Ford F150 with OBDII code P1128 due to Front O2 Sensor Connectors Swapped?

It is not recommended to drive the vehicle with this issue as it can lead to further damage to the engine and emissions system.

5. What is the repair process for fixing the Front O2 Sensor Connectors Swapped issue causing OBDII code P1128 in a 1999 Ford F150?

The repair involves correctly identifying and reconnecting the Front O2 sensor connectors to their respective locations based on the vehicle's wiring diagram.

6. Are there any DIY tips for resolving OBDII code P1128 in a 1999 Ford F150 related to Front O2 Sensor Connectors Swapped?

If you are confident in your abilities, you can attempt to swap the connectors back to their correct positions following the vehicle's wiring diagram.

7. Will resetting the Check Engine light clear OBDII code P1128 caused by Front O2 Sensor Connectors Swapped in a 1999 Ford F150?

Resetting the Check Engine light may temporarily turn it off, but the underlying issue of swapped sensor connectors must be corrected to prevent the code from reappearing.

8. Are there any long-term consequences of ignoring OBDII code P1128 in a 1999 Ford F150 due to Front O2 Sensor Connectors Swapped?

Ignoring the issue can lead to increased emissions, reduced fuel efficiency, and potential damage to the catalytic converter and other engine components.

9. How much does it typically cost to fix OBDII code P1128 in a 1999 Ford F150 caused by Front O2 Sensor Connectors Swapped?

The cost can vary depending on the extent of the damage and whether professional help is needed, but it generally ranges from $100 to $300 for parts and labor.

10. Can a mechanic easily identify and correct the Front O2 Sensor Connectors Swapped issue triggering code P1128 in a 1999 Ford F150?

Yes, a qualified mechanic can efficiently diagnose and repair the swapped sensor connectors to resolve the OBDII code P1128 in a 1999 Ford F150.

Discuss the causes and fixes for P1128 1999 Ford F150 OBDII Code

Code P1128 1999 Ford F150 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play