P1125 1999 Ford F150 Code - Throttle Position Sensor Intermittent
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted, Throttle Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1125 1999 Ford F150 indicates Throttle Position Sensor Intermittent.
- Common causes
- Common causes include Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted, Throttle Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1125 1999 Ford F150 Description
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate
What are the Possible Causes of the DTC P1125 1999 Ford F150?
- Faulty Throttle Position Sensor
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor electrical connection
How to Fix the DTC P1125 1999 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1125 1999 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1125 1999 Ford F150 code?
Need more information on how to fix the P1125 1999 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1125 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1125 1999 Ford F150 Code
What does the OBDII code P1125 mean on a 1999 Ford F150?
P1125 indicates an intermittent issue with the Throttle Position Sensor (TPS), which helps the engine control module (ECM) monitor throttle input and adjust engine performance.
What are the symptoms of code P1125 in a 1999 Ford F150?
Common symptoms include poor acceleration, hesitation during throttle input, engine stalling, rough idling, and a possible check engine light.
What causes the P1125 code in a 1999 Ford F150?
Possible causes include a faulty Throttle Position Sensor, damaged sensor wiring, loose or corroded electrical connections, or an ECM issue.
Can I drive my 1999 Ford F150 with the P1125 code?
While the truck may still be drivable, it could experience performance problems like hesitation or stalling, which may pose safety risks. It's best to address the issue promptly.
How do I diagnose the P1125 code on my 1999 Ford F150?
Start by inspecting the TPS and its wiring for damage or loose connections. Use a multimeter to test the TPS for proper voltage signals. If no issues are found, the ECM might need further evaluation.
How do I fix the P1125 code in a 1999 Ford F150?
Repairs could include replacing the TPS, repairing or replacing damaged wiring, cleaning corroded connectors, or, in rare cases, reprogramming or replacing the ECM.
How much does it cost to fix a P1125 code on a 1999 Ford F150?
Replacing the TPS typically costs between $100 and $250, including parts and labor. Wiring repairs may vary depending on the extent of the damage.
Can a dirty throttle body cause the P1125 code on a 1999 Ford F150?
While unlikely, a dirty throttle body could indirectly affect throttle operation and should be cleaned if other issues are ruled out.
Do I need to reset the ECM after fixing the P1125 code on my 1999 Ford F150?
Yes, clear the code using an OBDII scanner after completing the repair to ensure the issue is resolved and the check engine light stays off.
What tools do I need to troubleshoot the P1125 code on a 1999 Ford F150?
You'll typically need a digital multimeter, an OBDII scanner, and basic hand tools to inspect and test the TPS and related wiring.
Discuss the causes and fixes for P1125 1999 Ford F150 OBDII Code
Code P1125 1999 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
