P1124 MINI Code - Differential Pressure Sensor Intake Manifold Adaptation
Quick Answer
For a variable valve lift engine, the main function of the throttle body is to control the pressure in the intake manifold. Common causes include Faulty Differential Pressure Sensor, Differential Pressure Sensor harness is open or shorted, Differential Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1124 MINI indicates Differential Pressure Sensor Intake Manifold Adaptation.
- Common causes
- Common causes include Faulty Differential Pressure Sensor, Differential Pressure Sensor harness is open or shorted, Differential Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1124 MINI Description
The set-point of the differential intake manifold pressure is up to 60-70% of maximum torque request constant 5 kPa beneath ambient pressure. At a higher load, the differential pressure setpoint becomes Zero.
In case the set-point of the differential pressure in the intake manifold is > 3 kPa beneath the ambient pressure, a differential pressure controller is active. The output of the controller is monitored. The output of the manifold pressure controller has to be between adjustable MIN/MAX-thresholds. If the MIN/MAX thresholds are exceeded a time counter is incremented. After this counter reaches the threshold within one diagnosis cycle, a manifold differential pressure sensor malfunction is detected.
The Engine Control Module (ECM) monitors the Differential Pressure Sensor Intake Manifold Adaptation. The Diagnostic Trouble Code (DTC) will be set when the ECM receives an implausible signal from the Differential Pressure Sensor.
What are the Possible Causes of the DTC P1124 MINI?
- Faulty Differential Pressure Sensor
- Differential Pressure Sensor harness is open or shorted
- Differential Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1124 MINI?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1124 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1124 MINI code?
Need more information on how to fix the P1124 MINI code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1124 MINI code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1124 MINI Code
What does the OBDII code P1124 mean on a MINI?
P1124 on a MINI indicates an issue with the Differential Pressure Sensor for the intake manifold, specifically related to its adaptation or calibration.
What are the common symptoms of code P1124 in a MINI?
Symptoms may include reduced engine performance, poor acceleration, rough idling, and potential illumination of the Check Engine Light.
What causes the P1124 code to be triggered in a MINI?
Common causes include a faulty differential pressure sensor, intake manifold leaks, clogged air passages, or wiring and connector issues related to the sensor.
Can a dirty or clogged air filter cause code P1124?
While a dirty air filter may not directly cause P1124, it can contribute to intake airflow issues that may indirectly affect sensor readings.
How do I diagnose the P1124 code on my MINI?
Start by checking the differential pressure sensor and its wiring for damage or corrosion, inspect the intake manifold for leaks, and use a scan tool to verify sensor readings.
Is it safe to drive with the P1124 code active on a MINI?
Driving with P1124 is not recommended, as it can lead to reduced engine performance and potentially cause further damage if left unresolved.
How do I fix the P1124 code on my MINI?
Repairs may involve replacing the differential pressure sensor, fixing intake manifold leaks, cleaning air passages, or addressing wiring issues.
Can a software update fix the P1124 code on a MINI?
In some cases, a software update or ECU adaptation reset may resolve the issue if it’s related to calibration or sensor adaptation errors.
How much does it cost to repair code P1124 on a MINI?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor needs replacement or if additional repairs are required.
Can a vacuum leak cause the P1124 code on a MINI?
Yes, a vacuum leak in the intake manifold can affect differential pressure readings and trigger the P1124 code.
Discuss the causes and fixes for P1124 MINI OBDII Code
Code P1124 MINI comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
