P1124 2010 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1124 2010 Ford Fusion indicates Throttle Position Sensor Out of Self-Test Range.
- Common causes
- Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1124 2010 Ford Fusion Description
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate
What are the Possible Causes of the DTC P1124 2010 Ford Fusion?
- Binding or bent throttle linkage
- Faulty Throttle Position Sensor
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor electrical connection
How to Fix the DTC P1124 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1124 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1124 2010 Ford Fusion code?
Need more information on how to fix the P1124 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1124 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1124 2010 Ford Fusion Code
1. What does the OBDII code P1124 mean for a 2010 Ford Fusion?
P1124 indicates that the throttle position sensor (TPS) is out of its expected self-test range, meaning the sensor's readings are not within the normal operational limits.
2. What are the common symptoms of code P1124 in a 2010 Ford Fusion?
Symptoms may include poor acceleration, hesitation during throttle input, reduced engine performance, and the check engine light turning on.
3. What causes the P1124 code to appear in a 2010 Ford Fusion?
Common causes include a faulty throttle position sensor, wiring issues like damaged or corroded connections, or a malfunctioning throttle body.
4. How can I diagnose the P1124 code in my 2010 Ford Fusion?
Start by scanning the vehicle for codes and inspecting the TPS, wiring, and connectors for damage or corrosion. Use a multimeter to check the voltage output of the TPS.
5. Can I still drive my 2010 Ford Fusion with the P1124 code?
Driving with this code is possible but not recommended, as it can lead to reduced performance and potential safety issues due to unpredictable throttle behavior.
6. How do I fix the P1124 code in a 2010 Ford Fusion?
Repairs may include replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning the throttle body, or recalibrating the TPS.
7. How much does it cost to fix the P1124 code on a 2010 Ford Fusion?
Costs vary, but replacing the TPS typically ranges from $100 to $300, including parts and labor, depending on the repair shop and location.
8. Can a dirty throttle body cause the P1124 code in a 2010 Ford Fusion?
Yes, a dirty or clogged throttle body can cause incorrect sensor readings and trigger the P1124 code.
9. Do I need to reset the ECU after fixing the P1124 code on my 2010 Ford Fusion?
Yes, after repairs, reset the ECU by clearing the code using an OBDII scanner to ensure proper operation and verify the issue is resolved.
10. How can I prevent the P1124 code from recurring in my 2010 Ford Fusion?
Regular maintenance, including cleaning the throttle body and inspecting the TPS and wiring, can help prevent recurring issues with this code.
Discuss the causes and fixes for P1124 2010 Ford Fusion OBDII Code
Code P1124 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
