P1124 2007 FORD FUSION Code - Throttle Position Sensor Out of Self-Test Range
|P1124 2007 FORD FUSION code possible causes
- Binding or bent throttle linkage
- Faulty Throttle Position Sensor
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor electrical connection
|How do I fix the P1124 2007 FORD FUSION code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|P1124 2007 FORD FUSION code tech notesThe throttle position (TP) sensor circuit is monitored by the powertrain control module (PCM) for an out of range TP rotation angle or voltage input. The test fails if the TP rotation angle or voltage reading is less than 13.27% (0.66 volt) or greater than 23.52% (1.17 volts).
|Cost of diagnosing the P1124 2007 FORD FUSION code
Labor: 1.0The cost of diagnosing the P1124 2007 FORD FUSION code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|When is the P1124 2007 FORD FUSION code detected?Engine Control Module (ECM) detected a Thottle Position (TP) sensor return voltage above or below expected value at an idle condition
|What are P1124 2007 FORD FUSION code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|P1124 2007 FORD FUSION code descriptionThe Throttle Position Sensor (TPS) responds to the accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate
|Need more information with the P1124 2007 FORD FUSION code?Need more information on how to fix the P1124 2007 FORD FUSION code? Get Access to Factory Service Manuals
|Need help with a P1124 2007 FORD FUSION code?Get the P1124 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
|P1124 2007 FORD FUSION code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P1124 2007 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks