P1120 2008 FORD FUSION - Throttle Position Sensor Out of Range
P1120 2008 FORD FUSION Possible Causes
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Throttle position sensor not properly adjusted
First diagnose P1120 2008 FORD FUSION code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1120 2008 FORD FUSION code
Labor: 1.0The cost of diagnosing the P1120 2008 FORD FUSION code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1120 2008 FORD FUSION code detected?Malfunction is detected when voltage from the sensor is sent to Engine Control Module (ECM) is out of range.
P1120 2008 FORD FUSION Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- No throttle response
P1120 2008 Ford Fusion DescriptionThe Throttle Position Sensor (TPS) responds to the accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate
P1120 2008 FORD FUSION More InformationNeed more information on how to fix the P1120 2008 FORD FUSION code?
Get Access to Factory Service Manuals
Need more help?Get the P1120 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
P1120 2008 FORD FUSION CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1120 2008 Ford Fusion code? Have you replaced any parts?
Any information is appreciated. Thanks