AutoCodesFord – P1120 2006 Ford Fusion

P1120 2006 Ford Fusion Code - Throttle Position Sensor Out of Range

Quick Answer

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1120 2006 Ford Fusion indicates Throttle Position Sensor Out of Range.
Common causes
Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,077
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 25, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1120 2006 Ford Fusion Description

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate
OBDII Code P1120 2006 Ford Fusion - Throttle Position Sensor Out of Range - AutoCodes.com
P1120 2006 Ford Fusion Code - Throttle Position Sensor Out of Range

What are the Possible Causes of the DTC P1120 2006 Ford Fusion?

  • Faulty throttle position sensor
  • Throttle position sensor harness is open or shorted
  • Throttle position sensor circuit poor electrical connection
  • Throttle position sensor not properly adjusted

How to Fix the DTC P1120 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1120 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1120 2006 Ford Fusion code?

Need more information on how to fix the P1120 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1120 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1120 2006 Ford Fusion Code

1. What does the OBDII code P1120 mean on a 2006 Ford Fusion?

P1120 indicates that the Throttle Position Sensor (TPS) is reporting a voltage outside the expected range, which can cause issues with engine performance.

2. What are the symptoms of code P1120 in a 2006 Ford Fusion?

Common symptoms include poor acceleration, engine stalling, reduced fuel efficiency, hesitation during throttle application, and the Check Engine Light being illuminated.

3. What causes the P1120 code in a 2006 Ford Fusion?

Potential causes include a faulty throttle position sensor, wiring issues such as damaged or corroded connectors, or problems with the vehicle's powertrain control module (PCM).

4. Can I drive my 2006 Ford Fusion with a P1120 code?

It is not recommended to drive with this code, as it can lead to unsafe driving conditions like reduced engine power or stalling.

5. How do I fix the P1120 code on a 2006 Ford Fusion?

Common fixes include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, and, if necessary, reprogramming or replacing the PCM.

6. How is the P1120 code diagnosed?

A mechanic will use a scan tool to confirm the code, inspect the TPS and its wiring for damage, and test the sensor's voltage readings to ensure they are within range.

7. How much does it cost to repair a P1120 code on a 2006 Ford Fusion?

The cost can range from $100 to $300, depending on whether the issue is a simple sensor replacement or additional wiring repairs are required.

8. Can a dirty throttle body cause the P1120 code?

While uncommon, a dirty or malfunctioning throttle body can sometimes trigger TPS-related codes if it interferes with proper sensor readings.

9. Does the P1120 code mean the throttle position sensor is completely broken?

Not necessarily. The sensor could be misaligned or experiencing intermittent faults due to wiring or connector issues.

10. How can I prevent the P1120 code from appearing in the future?

Regular maintenance, including inspecting and cleaning electrical connections and ensuring the throttle body is clean, can help prevent this code from reoccurring.

Discuss the causes and fixes for P1120 2006 Ford Fusion OBDII Code

Code P1120 2006 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play