P1119 INFINITI - Radiator Coolant Temperature Sensor
P1119 INFINITI Possible Causes
- Faulty Radiator Coolant Temperature Sensor
- Radiator Coolant Temperature Sensor harness is open or shorted
- Radiator Coolant Temperature Sensor circuit poor electrical connection
First diagnose P1119 INFINITI code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1119 INFINITI code
Labor: 1.0The cost of diagnosing the P1119 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1119 INFINITI code detected?Malfunction is detected when an excessively high or low voltage from the radiator coolant temperature sensor is sent to Engine Control Module (ECM).
P1119 INFINITI Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1119 Infiniti DescriptionThe radiator coolant temperature sensor is installed on the radiator lower tank and used to detect the radiator coolant temperature. The sensor modifies a voltage signal from the Engine Control Module (ECM) and returns the modified signal to the ECM as the radiator coolant temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of thermistor decreases as temperature increase. The ECM uses this signal to control the cooling fan speed control solenoid valve.
P1119 INFINITI More InformationNeed more information on how to fix the P1119 INFINITI code?
Get Access to Factory Service Manuals
Need more help?Get the P1119 Infiniti code diagnosed by a professional: Find a repair shop in your area
P1119 INFINITI CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1119 Infiniti code? Have you replaced any parts?
Any information is appreciated. Thanks