AutoCodes – Ford – P1115 2002 Ford F150

P1115 2002 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit High

Quick Answer

The IAT sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1115 2002 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit High.
Common causes: Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,635

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 21, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1115 2002 Ford F150 Description

The IAT sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases, and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signals to the Powertrain Control Module (PCM) corresponding to temperature.
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. Voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and air flow.
The IAT sensor provides a quicker temperature change response time than the ECT or CHT sensor.
Currently there are 2 types of IAT sensors used, a stand alone, non-integrated type and an integrated type. Both types function the same, however the integrated type is incorporated into the mass air flow (MAF) sensor instead of being a stand-alone sensor.

OBDII Code P1115 2002 Ford F150 - Intake Air Temperature Sensor 2 Circuit High - AutoCodes.com — P1115 2002 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit High

What does this mean?

What are the Possible Causes of the DTC P1115 2002 Ford F150?

Faulty Intake Air Temperature Sensor 2
Intake Air Temperature Sensor 2 harness is open or shorted
Intake Air Temperature Sensor 2 circuit poor electrical connection
Damaged Powertrain Control Module (PCM)

How to Fix the DTC P1115 2002 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor. Monitor the IAT on a scan tool. Look for sudden changes in the reading when the harness is wiggled or the sensor is tapped.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1115 2002 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1115 2002 Ford F150 code?

Need more information on how to fix the P1115 2002 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1115 2002 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1115 2002 Ford F150 Code

1. What are the common symptoms of OBDII code P1115 in a 2002 Ford F150 related to the Intake Air Temperature Sensor 2 Circuit High?

The common symptoms may include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P1115 indicate in a 2002 Ford F150?

The code P1115 suggests that there is a high voltage condition detected in the Intake Air Temperature Sensor 2 circuit of the vehicle.

3. What are the possible causes of the Intake Air Temperature Sensor 2 Circuit High issue in a 2002 Ford F150?

Potential causes could include a faulty intake air temperature sensor, damaged wiring or connectors, a malfunctioning engine control module (ECM), or a problem with the sensor's ground.

4. How can I diagnose the Intake Air Temperature Sensor 2 Circuit High problem in my 2002 Ford F150?

You can diagnose the issue by checking the sensor's wiring and connectors for any damage, testing the sensor's resistance, and using a scan tool to monitor the sensor's readings.

5. Can I continue driving my 2002 Ford F150 with the P1115 code related to the Intake Air Temperature Sensor 2 Circuit High?

It is not recommended to drive your vehicle with this issue as it can lead to further damage and poor engine performance. It's best to address the problem promptly.

6. How can I repair the Intake Air Temperature Sensor 2 Circuit High problem in my 2002 Ford F150?

The repair may involve replacing the faulty intake air temperature sensor, repairing any damaged wiring or connectors, resetting the fault codes, and clearing the check engine light.

7. Is it possible to reset the OBDII code P1115 in a 2002 Ford F150 without fixing the underlying issue?

While you can clear the code using an OBDII scanner, it is important to address the root cause of the problem to prevent it from reoccurring.

8. Will fixing the Intake Air Temperature Sensor 2 Circuit High problem improve my 2002 Ford F150's performance and fuel efficiency?

Yes, resolving the issue should help restore proper engine performance, fuel efficiency, and ensure the vehicle operates optimally.

9. How much does it typically cost to repair the P1115 code related to the Intake Air Temperature Sensor 2 Circuit High in a 2002 Ford F150?

The cost of repair can vary depending on the extent of the issue, but it may involve parts and labor expenses ranging from $100 to $300 or more.

10. Can a DIY enthusiast fix the Intake Air Temperature Sensor 2 Circuit High problem in a 2002 Ford F150?

If you have experience with automotive repairs and the necessary tools, you may be able to replace the sensor or repair the wiring yourself. However, consulting a professional mechanic is recommended for accurate diagnosis and repair.