AutoCodes – Mercury – P1114 Mercury

P1114 Mercury Code - Intake Air Temperature Sensor 2 Circuit Low

Quick Answer

The IAT sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1114 Mercury indicates Intake Air Temperature Sensor 2 Circuit Low.
Common causes: Common causes include Faulty Intake Air Temperature Sensor 2, Intake Air Temperature Sensor 2 harness is open or shorted, Intake Air Temperature Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,652

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 21, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1114 Mercury Description

The IAT sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as the temperature increases, and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signals to the Powertrain Control Module (PCM) corresponding to temperature.
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. Voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and air flow.
The IAT sensor provides a quicker temperature change response time than the ECT or CHT sensor.
Currently there are 2 types of IAT sensors used, a stand alone, non-integrated type and an integrated type. Both types function the same, however the integrated type is incorporated into the mass air flow (MAF) sensor instead of being a stand-alone sensor.

OBDII Code P1114 Mercury - Intake Air Temperature Sensor 2 Circuit Low - AutoCodes.com — P1114 Mercury Code - Intake Air Temperature Sensor 2 Circuit Low

What does this mean?

What are the Possible Causes of the DTC P1114 Mercury?

Faulty Intake Air Temperature Sensor 2
Intake Air Temperature Sensor 2 harness is open or shorted
Intake Air Temperature Sensor 2 circuit poor electrical connection
Damaged Powertrain Control Module (PCM)

How to Fix the DTC P1114 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor. Monitor the IAT on a scan tool. Look for sudden changes in the reading when the harness is wiggled or the sensor is tapped.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1114 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1114 Mercury code?

Need more information on how to fix the P1114 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1114 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1114 Mercury Code

1. What are the common symptoms of OBDII code P1114 on a Mercury related to the Intake Air Temperature Sensor 2 Circuit Low?

- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.

2. What usually causes the OBDII code P1114 on a Mercury indicating an issue with the Intake Air Temperature Sensor 2 Circuit Low?

- The usual causes are a faulty intake air temperature sensor, damaged wiring or connectors, or a problem with the sensor circuit.

3. How can I diagnose the OBDII code P1114 on my Mercury for the Intake Air Temperature Sensor 2 Circuit Low issue?

- You can diagnose the issue by inspecting the sensor and its wiring for any visible damage, using a multimeter to test the sensor's resistance, and checking for any loose connections.

4. Is it safe to continue driving my Mercury with the OBDII code P1114 related to the Intake Air Temperature Sensor 2 Circuit Low?

- It is not recommended to drive your vehicle with this code as it can lead to further engine damage and poor performance.

5. Can I reset the OBDII code P1114 on my Mercury indicating an Intake Air Temperature Sensor 2 Circuit Low issue?

- Yes, you can reset the code using an OBDII scanner, but it is important to address the underlying problem to prevent the code from reoccurring.

6. How much does it typically cost to repair the OBDII code P1114 on a Mercury due to the Intake Air Temperature Sensor 2 Circuit Low issue?

- Repair costs can vary depending on the exact cause of the issue, but it can range from $100 to $300 for sensor replacement or wiring repairs.

7. Are there any DIY tips for fixing the OBDII code P1114 related to the Intake Air Temperature Sensor 2 Circuit Low on my Mercury?

- DIY tips include checking and cleaning the sensor connections, inspecting wiring for damage, and replacing the sensor if necessary following a guide or manual.

8. Will the OBDII code P1114 cause my Mercury to fail an emissions test due to the Intake Air Temperature Sensor 2 Circuit Low issue?

- Yes, this code can cause your vehicle to fail an emissions test as it indicates a problem with the intake air temperature sensor circuit.

9. How long does it typically take to repair the OBDII code P1114 on a Mercury caused by the Intake Air Temperature Sensor 2 Circuit Low issue?

- Repair times can vary based on the exact cause and complexity of the repair, but it generally takes around 1-2 hours for a sensor replacement or wiring repair.

10. Can a faulty Intake Air Temperature Sensor 2 Circuit Low affect other systems in my Mercury besides triggering the OBDII code P1114?

- Yes, a faulty sensor can lead to issues with fuel delivery, air-to-fuel ratio, and overall engine performance in addition to triggering the specific OBDII code P1114.