P1114 GMC Code - Engine Coolant Temperature Sensor Circuit Intermittent Low Voltage
Quick Answer
The Engine Coolant Temperature (ECT) sensor contains a semiconductor device which changes resistance based on temperature (a thermistor). Common causes include Faulty Engine Coolant Temperature (ECT) sensor, Low engine coolant level, Engine Coolant Temperature (ECT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1114 GMC indicates Engine Coolant Temperature Sensor Circuit Intermittent Low Voltage.
- Common causes
- Common causes include Faulty Engine Coolant Temperature (ECT) sensor, Low engine coolant level, Engine Coolant Temperature (ECT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1114 GMC Description
When the engine coolant is cold, the sensor (thermistor) resistance is high, and the PCMs signal voltage is only pulled down a small amount through the sensor to ground. The PCM senses a high signal voltage (low temperature). When the engine coolant is warm, the sensor resistance is low, and the signal voltage is pulled down a greater amount. This causes the PCM to sense a low signal voltage (high temperature).
What are the Possible Causes of the DTC P1114 GMC?
- Faulty Engine Coolant Temperature (ECT) sensor
- Low engine coolant level
- Engine Coolant Temperature (ECT) sensor harness is open or shorted
- Engine Coolant Temperature (ECT) sensor electrical circuit poor connection
- Faulty engine coolant thermostat
How to Fix the DTC P1114 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1114 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1114 GMC code?
Need more information on how to fix the P1114 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1114 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1114 GMC Code
What does the OBDII code P1114 mean for a GMC vehicle?
P1114 indicates an intermittent low voltage issue in the Engine Coolant Temperature (ECT) Sensor Circuit, which can affect engine performance and emissions.
What are the common symptoms of code P1114 in a GMC?
Symptoms may include poor fuel economy, rough idling, hard starting, engine overheating, or an illuminated check engine light.
What causes the P1114 code to appear on a GMC?
Possible causes include a faulty ECT sensor, corroded or damaged wiring, a loose electrical connection, or a malfunctioning PCM (Powertrain Control Module).
How does the ECT sensor affect engine performance?
The ECT sensor provides temperature data to the PCM, which adjusts fuel mixture and ignition timing. A faulty sensor can cause incorrect adjustments, leading to performance issues.
Can I drive my GMC with the P1114 code?
While the vehicle may still be drivable, ignoring this code can lead to increased fuel consumption, overheating, or potential engine damage if not addressed promptly.
How do I diagnose the P1114 code on my GMC?
You can inspect the ECT sensor, check for damaged wiring or connectors, test the sensor's voltage with a multimeter, and use an OBDII scanner to confirm the issue.
What tools are needed to fix a P1114 code?
You may need an OBDII scanner, a multimeter, replacement wiring or connectors, and potentially a new ECT sensor.
How much does it cost to fix a P1114 code on a GMC?
Repair costs vary but typically range from $50 to $200, depending on whether you need to replace the sensor, fix wiring, or seek professional help.
Can a dirty coolant system cause the P1114 code?
Yes, contaminated or low coolant can impact the ECT sensor's readings, potentially triggering the P1114 code.
How can I prevent the P1114 code from recurring?
Regular maintenance, such as checking the coolant level, inspecting wiring, and replacing the ECT sensor when needed, can help prevent this issue.
Discuss the causes and fixes for P1114 GMC OBDII Code
Code P1114 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
