P1108 Subaru Code - Induction Control Solenoid Valve Circuit Malfunction
Quick Answer
P1108 Subaru indicates Induction Control Solenoid Valve Circuit Malfunction. Common causes include Faulty Induction Control Solenoid Valve, Induction Control Solenoid Valve harness is open or shorted, Induction Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1108 Subaru indicates Induction Control Solenoid Valve Circuit Malfunction.
- Common causes
- Common causes include Faulty Induction Control Solenoid Valve, Induction Control Solenoid Valve harness is open or shorted, Induction Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1108 Subaru Description
What are the Possible Causes of the DTC P1108 Subaru?
- Faulty Induction Control Solenoid Valve
- Induction Control Solenoid Valve harness is open or shorted
- Induction Control Solenoid Valve circuit poor electrical connection
How to Fix the DTC P1108 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1108 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1108 Subaru code?
Need more information on how to fix the P1108 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1108 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1108 Subaru Code
1. What are common symptoms of OBDII code P1108 Subaru?
Common symptoms include rough idling, engine stalling, reduced fuel efficiency, and a noticeable decrease in engine performance.
2. What can cause the Induction Control Solenoid Valve Circuit Malfunction in a Subaru triggering code P1108?
Possible causes include a faulty induction control solenoid valve, damaged wiring or connectors, vacuum leaks, or a problem with the engine control module.
3. How can I diagnose the Induction Control Solenoid Valve Circuit Malfunction in my Subaru?
Diagnosis typically involves using an OBDII scanner to retrieve the code, conducting a visual inspection of the solenoid valve and its connections, checking for vacuum leaks, and performing electrical tests on the solenoid valve circuit.
4. Can I drive my Subaru with OBDII code P1108?
It is not recommended to drive your Subaru with this code present, as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
5. What is the typical repair process for OBDII code P1108 in a Subaru?
Repairing this code usually involves replacing the faulty induction control solenoid valve, repairing any damaged wiring or connectors, fixing vacuum leaks, and clearing the error code.
6. Are there any maintenance tips to prevent OBDII code P1108 in a Subaru?
Regularly inspecting and maintaining the induction control solenoid valve, checking for vacuum leaks, and ensuring proper electrical connections can help prevent this code from appearing.
7. Can a DIY enthusiast fix OBDII code P1108 in a Subaru?
Depending on the level of expertise, a DIY enthusiast may be able to address this issue by following repair manuals and guides. However, if unsure, it's best to seek professional help.
8. How much does it cost to repair OBDII code P1108 in a Subaru?
The cost of repair can vary depending on the cause of the issue, the parts needed, and labor charges. It's advisable to obtain quotes from different mechanics or repair shops.
9. Will resetting the error code resolve OBDII code P1108 in a Subaru?
Resetting the error code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to reappear. It's crucial to address the root cause of the problem.
10. Is OBDII code P1108 specific to Subaru vehicles only?
While this code is commonly associated with Subaru vehicles, it can also appear in other car makes and models with similar induction control solenoid valve circuit malfunctions.
Discuss the causes and fixes for P1108 Subaru OBDII Code
Code P1108 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
