P1108 Hyundai Code - Manifold Absolute Pressure Sensor Short Circuit
Quick Answer
P1108 Hyundai indicates Manifold Absolute Pressure Sensor Short Circuit . Common causes include Faulty Manifold Absolute Pressure (MAP) sensor, Manifold Absolute Pressure (MAP) sensor harness is open or shorted, Manifold Absolute Pressure (MAP) sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1108 Hyundai indicates Manifold Absolute Pressure Sensor Short Circuit .
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) sensor, Manifold Absolute Pressure (MAP) sensor harness is open or shorted, Manifold Absolute Pressure (MAP) sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1108 Hyundai Description
What are the Possible Causes of the DTC P1108 Hyundai?
- Faulty Manifold Absolute Pressure (MAP) sensor
- Manifold Absolute Pressure (MAP) sensor harness is open or shorted
- Manifold Absolute Pressure (MAP) sensor circuit poor electrical connection
How to Fix the DTC P1108 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1108 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1108 Hyundai code?
Need more information on how to fix the P1108 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1108 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1108 Hyundai Code
1. What does the OBDII code P1108 mean on a Hyundai?
P1108 indicates a short circuit issue in the Manifold Absolute Pressure (MAP) sensor circuit, which monitors the air pressure in the intake manifold to help optimize engine performance.
2. What are the common symptoms of the P1108 code in a Hyundai?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, hesitation during acceleration, and an illuminated check engine light.
3. What causes the P1108 code to appear on a Hyundai?
Common causes include a damaged MAP sensor, wiring issues such as frayed or shorted wires, corroded electrical connectors, or a faulty engine control module (ECM).
4. Can I drive my Hyundai with the P1108 code?
While the car may still be drivable, it’s not recommended as continued operation with this issue can lead to reduced performance, increased emissions, and potential engine damage.
5. How do you diagnose the P1108 code on a Hyundai?
A technician will inspect the MAP sensor, check for damaged wiring or connectors, measure voltage and resistance in the circuit, and use a scan tool to confirm the issue.
6. How do you fix the P1108 code on a Hyundai?
Repairs may include replacing the MAP sensor, repairing or replacing damaged wiring, cleaning or replacing corroded connectors, or reprogramming the ECM if necessary.
7. How much does it cost to fix the P1108 code on a Hyundai?
Repair costs vary but typically range from $100 to $300, depending on whether the MAP sensor, wiring, or connectors need replacement.
8. Can a dirty air filter cause the P1108 code?
A dirty air filter is unlikely to directly cause the P1108 code, but it can affect engine performance, which may exacerbate related issues.
9. Will resetting the check engine light fix the P1108 code?
Resetting the light may temporarily clear the code, but the underlying issue must be resolved to prevent the code from returning.
10. Is the MAP sensor the same as the MAF sensor?
No, the MAP sensor measures intake manifold pressure, while the MAF (Mass Air Flow) sensor measures the amount of air entering the engine.
Discuss the causes and fixes for P1108 Hyundai OBDII Code
Code P1108 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
