P1106 Acura Code - Barometric Pressure Sensor Range/Performance Problem
Quick Answer
The Barometric Pressure (BARO) sensor is built into the Engine Control Module (ECM) and monitors atmospheric pressure. Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1106 Acura indicates Barometric Pressure Sensor Range/Performance Problem.
- Common causes
- Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1106 Acura Description
What are the Possible Causes of the DTC P1106 Acura?
- Engine Control Module (ECM) outdated or incorrect software
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1106 Acura?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
- Clear code
- Start the engine
- Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle
- Test-drive with the A/T in 2nd position, M/T in 4th gear
- Press accelerator pedal over 1/2 way down for five seconds
- Check for codes again
- If the codes comes back ECM may need to be replace. If codes don't came back, problem is repaired.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1106 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1106 Acura code?
Need more information on how to fix the P1106 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1106 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1106 Acura Code
1. What are the common symptoms of OBDII code P1106 in an Acura vehicle?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What can cause the OBDII code P1106 in an Acura to trigger?
- The code P1106 is typically triggered by issues with the barometric pressure sensor, such as a malfunctioning sensor or a problem with the sensor circuit.
3. How serious is the Barometric Pressure Sensor Range/Performance Problem in an Acura?
- While the car may still be drivable with this issue, it is important to address it promptly to prevent potential engine damage and ensure optimal performance.
4. How can I diagnose the Barometric Pressure Sensor Range/Performance Problem in my Acura?
- Diagnosis usually involves using an OBDII scanner to read the fault codes, checking the barometric pressure sensor for proper operation, and inspecting the sensor wiring for any damage.
5. Can I continue driving my Acura with the P1106 code present?
- It is not recommended to drive your Acura with the P1106 code present for an extended period as it can lead to further damage and potentially affect the vehicle's performance.
6. What are some common repair tips for fixing the P1106 code in an Acura?
- Repair tips may include replacing the barometric pressure sensor, checking and repairing any damaged wiring, and resetting the fault codes after repairs are completed.
7. How much does it typically cost to repair the Barometric Pressure Sensor Range/Performance Problem in an Acura?
- Repair costs can vary depending on the extent of the issue and the specific model of Acura, but it generally ranges from $100 to $300 for parts and labor.
8. Can I reset the OBDII code P1106 in my Acura without fixing the underlying issue?
- While you can clear the fault code with an OBDII scanner, it is important to address the underlying problem causing the P1106 code to prevent it from reoccurring.
9. What are the potential long-term effects of ignoring the P1106 code in an Acura?
- Ignoring the P1106 code can lead to decreased fuel efficiency, engine misfires, and potential damage to other engine components over time.
10. Is it possible to prevent the Barometric Pressure Sensor Range/Performance Problem in my Acura?
- Regular maintenance, such as keeping the engine well-tuned and replacing sensors at recommended intervals, can help prevent issues like the P1106 code from occurring.
Discuss the causes and fixes for P1106 Acura OBDII Code
Code P1106 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
