AutoCodes - OBDII Code List - P1102 2003 INFINITI G35

P1102 2003 INFINITI G35 - Mass Air Flow Sensor Circuit Range/Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3    What is this?
Comments  |  Add Comment

P1102 2003 INFINITI G35 Possible Causes

  • Faulty mass air flow sensor
  • Dirty mass air flow sensor
  • Dirty mass air filter
  • Mass air flow sensor harness is open or shorted
  • Mass air flow sensor circuit poor electrical connection
  • Intake air leaks

How do I fix code P1102 2003 INFINITI G35

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Tech Notes

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor.

Cost of diagnosing the P1102 2003 INFINITI G35 code

Labor: 1.0

The cost of diagnosing the P1102 2003 INFINITI G35 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected?

A voltage from the sensor is constantly approx. 1.0V when engine is running.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Engine stall
  • Engine running rough
  • Excessive fuel consumption
  • Excessive smoke

P1102 2003 Infiniti G35 Description

The Mass Air Flow (MAF) sensor is placed in the stream of intake air. It measures the intake flow rate by measuring a part of the entire intake flow. It consists of a hot film that is supplied with electric current from the Engine Control Module (ECM).

The temperature of the hot film is controlled by the ECM acertain amount. The heat generated by the hot film is reduced as the intake air flows around it. The more air, the greater the heat loss. Therefore, the ECM must supply more electric current to maintain the temperature of the hot film as air flow increases. The ECM detects the air flow by means of this current change.
OBDII Code P1102 2003 Infiniti G35 - Mass Air Flow Sensor Circuit Range/Performance - AutoCodes.com

P1102 2003 INFINITI G35 More Information

Need more information on how to fix the P1102 2003 INFINITI G35 code?
Get Access to Factory Service Manuals

Need more help?

Get the P1102 2003 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area

Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P1102 2003 Infiniti G35 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧