AutoCodes – GMC – P1101 2018 GMC Sierra

P1101 2018 GMC Sierra Code - Intake Air Flow System Performance

Quick Answer

The Mass Air Flow (MAF) Sensor is integrated with the Intake Air Temperature (IAT) sensor. Common causes include Air leak between the Mass Air Flow (MAF) sensor and Throttle Body, Restricted Air Filter, Dirty Throttle Body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1101 2018 GMC Sierra indicates Intake Air Flow System Performance.
Common causes: Common causes include Air leak between the Mass Air Flow (MAF) sensor and Throttle Body, Restricted Air Filter, Dirty Throttle Body.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 250

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1101 2018 GMC Sierra Description

The Mass Air Flow (MAF) Sensor is integrated with the Intake Air Temperature (IAT) sensor. The MAF sensor is an air flow meter that measures the amount of air entering the engine. The MAF sensor used on this engine is a voltage-based sensor. The greater the airflow, the greater the voltage signal. The Engine Control Module (ECM) uses the MAF sensor signal to provide the correct fuel delivery for all engine speeds and loads. The Diagnostic Trouble Code (DTC) will be set if the ECM detects that the measured MAF is not within a calibrated range of the model for greater than 2 seconds.

OBDII Code P1101 2018 GMC Sierra - Intake Air Flow System Performance - AutoCodes.com — P1101 2018 GMC Sierra Code - Intake Air Flow System Performance

What does this mean?

What are the Possible Causes of the DTC P1101 2018 GMC Sierra?

Air leak between the Mass Air Flow (MAF) sensor and Throttle Body
Restricted Air Filter
Dirty Throttle Body
Dirty Mass Air Flow sensor
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P1101 2018 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1101 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1101 2018 GMC Sierra code?

Need more information on how to fix the P1101 2018 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1101 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1101 2018 GMC Sierra Code

1. What does the OBDII code P1101 mean on a 2018 GMC Sierra?

P1101 indicates an issue with the Intake Air Flow System Performance, meaning the airflow measured by the Mass Air Flow (MAF) sensor is outside the expected range set by the engine control module (ECM).

2. What are the common symptoms of code P1101 on a 2018 GMC Sierra?

Typical symptoms include rough idling, reduced engine performance, poor fuel economy, hesitation during acceleration, or an illuminated check engine light.

3. What causes the P1101 code to appear on a 2018 GMC Sierra?

Common causes include a dirty or faulty MAF sensor, vacuum leaks, a clogged air filter, intake air system obstructions, or issues with the throttle body.

4. Can a dirty air filter trigger the P1101 code on a 2018 GMC Sierra?

Yes, a dirty or clogged air filter can restrict airflow, causing the MAF sensor to send incorrect data to the ECM and trigger the P1101 code.

5. How do you diagnose the P1101 code on a 2018 GMC Sierra?

Diagnose the code by inspecting the MAF sensor, air filter, and intake system for dirt or obstructions. Use an OBDII scanner to check live data and compare MAF readings to manufacturer specifications.

6. Can a vacuum leak cause the P1101 code on a 2018 GMC Sierra?

Yes, a vacuum leak can disrupt the balance of air entering the intake system, causing the MAF sensor to report incorrect airflow readings and triggering the P1101 code.

7. How do you fix the P1101 code on a 2018 GMC Sierra?

Common fixes include cleaning or replacing the MAF sensor, replacing a clogged air filter, repairing vacuum leaks, cleaning the throttle body, or checking for intake obstructions.

8. Is it safe to drive a 2018 GMC Sierra with the P1101 code?

While the vehicle may still be drivable, driving with the P1101 code can lead to reduced performance and fuel efficiency. Prolonged driving without addressing the issue may cause additional engine problems.

9. Can cleaning the MAF sensor resolve the P1101 code on a 2018 GMC Sierra?

Yes, cleaning a dirty MAF sensor with specialized MAF cleaner can often resolve the code, provided the sensor isn't damaged.

10. How much does it cost to fix the P1101 code on a 2018 GMC Sierra?

Repair costs vary depending on the cause. Cleaning a MAF sensor or replacing an air filter may cost $20-$50, while replacing a faulty MAF sensor or repairing vacuum leaks could cost $150-$500.