AutoCodes – Cadillac – P10F5 Cadillac

P10F5 Cadillac Code - EVAP Purge Pump Status Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty EVAP Purge Pump, EVAP Purge Pump harness is open or shorted, EVAP Purge Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P10F5 Cadillac indicates EVAP Purge Pump Status Message Counter Incorrect.
Common causes: Common causes include Faulty EVAP Purge Pump, EVAP Purge Pump harness is open or shorted, EVAP Purge Pump circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 485

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 26, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P10F5 Cadillac Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the EVAP Purge Pump Status Message Counter Incorrect.

OBDII Code P10F5 Cadillac - EVAP Purge Pump Status Message Counter Incorrect - AutoCodes.com — P10F5 Cadillac Code - EVAP Purge Pump Status Message Counter Incorrect

What does this mean?

What are the Possible Causes of the DTC P10F5 Cadillac?

Faulty EVAP Purge Pump
EVAP Purge Pump harness is open or shorted
EVAP Purge Pump circuit poor electrical connection

How to Fix the DTC P10F5 Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P10F5 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P10F5 Cadillac code?

Need more information on how to fix the P10F5 Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P10F5 Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P10F5 Cadillac Code

What does the OBDII code P10F5 mean for my Cadillac?

The P10F5 code indicates that there is an issue with the EVAP purge pump status message counter, suggesting that the vehicle's onboard diagnostic system is detecting an incorrect signal related to the EVAP system.

What are the common symptoms of the P10F5 code?

Common symptoms may include the check engine light being illuminated, poor fuel economy, rough idling, or difficulty starting the engine.

What could cause the P10F5 code to trigger?

Causes can include a faulty EVAP purge pump, issues with the wiring or connectors related to the purge pump, or problems within the EVAP system itself.

How can I diagnose the P10F5 code?

To diagnose the P10F5 code, use an OBDII scanner to read the code, inspect the EVAP system components, check for leaks, and test the functionality of the purge pump and its electrical connections.

What repairs might be necessary to fix the P10F5 code?

Repairs may involve replacing a faulty EVAP purge pump, repairing or replacing damaged wiring, fixing any leaks in the EVAP system, or reprogramming the vehicle's computer if needed.

Can I drive my Cadillac with the P10F5 code?

While it may be possible to drive with this code, it is not recommended as it can lead to increased emissions and may worsen other engine performance issues.

Will clearing the P10F5 code solve the problem?

Clearing the code may temporarily turn off the check engine light, but it will not fix the underlying issue. The code is likely to return if the problem is not repaired.

How can I prevent the P10F5 code from occurring?

Regular maintenance of your vehicle, including checking the EVAP system for leaks and ensuring all components are in good working condition, can help prevent the P10F5 code from occurring.

Is the P10F5 code serious?

The seriousness of the P10F5 code can vary; while it may not cause immediate drivability issues, it can affect emissions and overall performance, so it is advisable to address it promptly.