AutoCodesGMC – P10F5 2016 GMC Sierra

P10F5 2016 GMC Sierra Code - EVAP Purge Pump Status Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty EVAP Purge Pump, EVAP Purge Pump harness is open or shorted, EVAP Purge Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P10F5 2016 GMC Sierra indicates EVAP Purge Pump Status Message Counter Incorrect.
Common causes
Common causes include Faulty EVAP Purge Pump, EVAP Purge Pump harness is open or shorted, EVAP Purge Pump circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 144
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 26, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P10F5 2016 GMC Sierra Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the EVAP Purge Pump Status Message Counter Incorrect.
OBDII Code P10F5 2016 GMC Sierra - EVAP Purge Pump Status Message Counter Incorrect - AutoCodes.com
P10F5 2016 GMC Sierra Code - EVAP Purge Pump Status Message Counter Incorrect

What are the Possible Causes of the DTC P10F5 2016 GMC Sierra?

  • Faulty EVAP Purge Pump
  • EVAP Purge Pump harness is open or shorted
  • EVAP Purge Pump circuit poor electrical connection

How to Fix the DTC P10F5 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P10F5 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P10F5 2016 GMC Sierra code?

Need more information on how to fix the P10F5 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P10F5 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P10F5 2016 GMC Sierra Code

What does the OBDII code P10F5 mean for a 2016 GMC Sierra?

The code P10F5 indicates an issue with the EVAP purge pump status message counter, suggesting incorrect data communication within the vehicle’s evaporative emissions system.

What are common symptoms of the P10F5 code?

Symptoms may include an illuminated check engine light, difficulty passing emissions tests, and potential fuel odor near the vehicle.

What causes the P10F5 code to appear?

Possible causes include a malfunctioning EVAP purge pump, damaged wiring or connectors, or software issues within the vehicle’s control module.

Can driving with the P10F5 code cause further damage?

While it may not immediately harm the engine, ignoring the code can lead to increased emissions and possible damage to EVAP system components over time.

How is the P10F5 code diagnosed?

Diagnosis typically involves scanning the vehicle’s computer for codes, inspecting the EVAP system components, checking wiring and connectors, and verifying the purge pump operation.

How do you fix the P10F5 code on a 2016 GMC Sierra?

Repairs may involve replacing the EVAP purge pump, repairing damaged wiring, or updating the vehicle’s software to correct communication errors.

How much does it cost to fix the P10F5 code?

Repair costs vary depending on the issue but typically range from $100 to $400, including parts and labor.

Can a faulty gas cap trigger the P10F5 code?

A faulty gas cap is unlikely to cause this specific code, as it pertains to the purge pump status message, not a system leak.

Is the P10F5 code a common issue for the 2016 GMC Sierra?

The P10F5 code is less common than general EVAP system leak codes but can occur due to specific communication or component failures.

Will clearing the P10F5 code fix the problem?

Clearing the code without addressing the underlying issue may temporarily turn off the check engine light, but the code will likely return.

Discuss the causes and fixes for P10F5 2016 GMC Sierra OBDII Code

Code P10F5 2016 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play