P10E3 2014 GMC Sierra Code - Ignition On/Start Circuit Source Bypass Relay Control Circuit High Voltage
Quick Answer
The Engine Control Module (ECM) contains a microprocessor used to process input data to control outputs. Common causes include Faulty Engine Control Module Wake-Up Relay, Engine Control Module Wake-Up Relay harness is open or shorted, Engine Control Module Wake-Up Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10E3 2014 GMC Sierra indicates Ignition On/Start Circuit Source Bypass Relay Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Engine Control Module Wake-Up Relay, Engine Control Module Wake-Up Relay harness is open or shorted, Engine Control Module Wake-Up Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10E3 2014 GMC Sierra Description
What are the Possible Causes of the DTC P10E3 2014 GMC Sierra?
- Faulty Engine Control Module Wake-Up Relay
- Engine Control Module Wake-Up Relay harness is open or shorted
- Engine Control Module Wake-Up Relay circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P10E3 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10E3 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10E3 2014 GMC Sierra code?
Need more information on how to fix the P10E3 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10E3 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10E3 2014 GMC Sierra Code
1. What does the OBDII code P10E3 mean on a 2014 GMC Sierra?
P10E3 indicates an issue with the Ignition On/Start Circuit Source Bypass Relay Control Circuit, specifically that the voltage is higher than expected.
2. What are the common symptoms of code P10E3 in a 2014 GMC Sierra?
Symptoms may include difficulty starting the engine, intermittent starting issues, or the Check Engine Light being illuminated.
3. What causes the P10E3 code to appear?
Common causes include a faulty bypass relay, damaged or corroded wiring, poor electrical connections, or a malfunctioning Engine Control Module (ECM).
4. Can I drive my 2014 GMC Sierra with the P10E3 code?
While the truck may still start and run, ignoring this code could lead to further electrical issues or complete failure to start. It’s best to address the issue promptly.
5. How do I diagnose code P10E3 in my GMC Sierra?
Diagnose by inspecting the bypass relay, checking the wiring and connectors for damage or corrosion, and testing the circuit voltage with a multimeter to identify irregularities.
6. What repairs might fix the P10E3 code?
Repairs could include replacing the bypass relay, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the ECM.
7. How much does it cost to fix the P10E3 code on a 2014 GMC Sierra?
The cost varies depending on the issue. Replacing a relay may cost $50–$100, while wiring repairs or ECM replacement could range from $200 to $1,200.
8. Can a weak battery cause the P10E3 code?
Yes, a weak or failing battery can cause electrical issues that might trigger this code. Ensure the battery and charging system are functioning properly.
9. What tools are needed to troubleshoot the P10E3 code?
You’ll need an OBDII scanner, a multimeter, and possibly a wiring diagram for the ignition circuit to diagnose the issue accurately.
10. Is the P10E3 code specific to the 2014 GMC Sierra?
The P10E3 code is not exclusive to the 2014 GMC Sierra, but the exact symptoms and fixes may vary depending on the vehicle make and model.
Discuss the causes and fixes for P10E3 2014 GMC Sierra OBDII Code
Code P10E3 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
