P10E3 2014 Chevrolet Silverado Code - Ignition On/Start Circuit Source Bypass Relay Control Circuit High Voltage
Quick Answer
The Engine Control Module (ECM) contains a microprocessor used to process input data to control outputs. Common causes include Faulty Engine Control Module Wake-Up Relay, Engine Control Module Wake-Up Relay harness is open or shorted, Engine Control Module Wake-Up Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10E3 2014 Chevrolet Silverado indicates Ignition On/Start Circuit Source Bypass Relay Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Engine Control Module Wake-Up Relay, Engine Control Module Wake-Up Relay harness is open or shorted, Engine Control Module Wake-Up Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10E3 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P10E3 2014 Chevrolet Silverado?
- Faulty Engine Control Module Wake-Up Relay
- Engine Control Module Wake-Up Relay harness is open or shorted
- Engine Control Module Wake-Up Relay circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P10E3 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10E3 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10E3 2014 Chevrolet Silverado code?
Need more information on how to fix the P10E3 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10E3 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10E3 2014 Chevrolet Silverado Code
What does the OBDII code P10E3 mean for a 2014 Chevrolet Silverado?
The P10E3 code indicates a high voltage issue in the Ignition On/Start Circuit Source Bypass Relay Control Circuit.
What are the common symptoms of the P10E3 code?
Symptoms may include difficulty starting the engine, intermittent starting issues, or the Check Engine Light being illuminated.
What causes the P10E3 code in a 2014 Chevrolet Silverado?
Common causes include a faulty bypass relay, damaged wiring or connectors, or issues with the powertrain control module (PCM).
Can a bad battery cause the P10E3 code?
Yes, a weak or failing battery can contribute to voltage irregularities, potentially triggering the P10E3 code.
How can I diagnose the P10E3 code in my Silverado?
Start by inspecting the bypass relay, wiring, and connectors for damage, and test for proper voltage and continuity in the circuit.
Is it safe to drive a 2014 Silverado with the P10E3 code?
Driving may be possible, but starting issues could worsen over time, so it's best to address the problem promptly.
How do I fix the P10E3 code?
Repairs may include replacing the bypass relay, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
Can the P10E3 code clear itself after repairs?
The code may clear itself if the issue is resolved, but manually clearing it with an OBDII scanner ensures it is fully reset.
What tools are needed to fix the P10E3 code?
You’ll need an OBDII scanner, a multimeter, and possibly replacement parts like a bypass relay or wiring components.
How much does it cost to repair the P10E3 code?
Repair costs vary but may range from $50 to $300 depending on whether only the relay needs replacement or more extensive repairs are required.
Discuss the causes and fixes for P10E3 2014 Chevrolet Silverado OBDII Code
Code P10E3 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
