P10E2 GMC Code - Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
Quick Answer
The Engine Control Module (ECM) contains a microprocessor used to process input data to control outputs. Common causes include Faulty Engine Control Module Wake-Up Relay, Engine Control Module Wake-Up Relay harness is open or shorted, Engine Control Module Wake-Up Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10E2 GMC indicates Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Engine Control Module Wake-Up Relay, Engine Control Module Wake-Up Relay harness is open or shorted, Engine Control Module Wake-Up Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P10E2 GMC Description
What are the Possible Causes of the DTC P10E2 GMC?
- Faulty Engine Control Module Wake-Up Relay
- Engine Control Module Wake-Up Relay harness is open or shorted
- Engine Control Module Wake-Up Relay circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P10E2 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P10E2 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P10E2 GMC code?
Need more information on how to fix the P10E2 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10E2 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P10E2 2014 GMC Sierra — Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
- P10E2 2015 GMC Sierra — Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
- P10E2 2016 GMC Sierra — Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
- P10E2 2017 GMC Sierra — Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
- P10E2 2018 GMC Sierra — Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
Frequently Asked Questions about P10E2 GMC Code
1. What are the common symptoms of OBDII code P10E2 in a GMC vehicle?
- Common symptoms include difficulty starting the engine, engine stalling, rough idling, and the Check Engine light illuminating on the dashboard.
2. What does the OBDII code P10E2 GMC indicate?
- The code P10E2 indicates a problem with the Ignition On/Start Circuit Source Bypass Relay Control Circuit having low voltage in a GMC vehicle.
3. What are the possible causes of the P10E2 code in a GMC vehicle?
- Possible causes include a faulty bypass relay control circuit, damaged wiring or connectors, a weak battery, or a malfunctioning ignition switch.
4. How can I diagnose the P10E2 code in my GMC vehicle?
- Diagnosing the code may involve checking the wiring and connectors for any visible damage, testing the relay for proper operation, and ensuring the battery and ignition switch are working correctly.
5. How serious is the OBDII code P10E2 in a GMC vehicle?
- While the code may not cause immediate harm to the vehicle, it can lead to starting issues and potential engine stalling, which may affect the drivability of the vehicle.
6. Can I continue driving my GMC with the P10E2 code present?
- It is not recommended to continue driving the vehicle with the P10E2 code present, as it can lead to potential starting and stalling issues that may leave you stranded.
7. How can I repair the Ignition On/Start Circuit Source Bypass Relay Control Circuit low voltage issue in my GMC?
- Repairing the issue may involve replacing the faulty relay, repairing damaged wiring or connectors, and ensuring the battery and ignition switch are in good working condition.
8. Will resetting the OBDII code P10E2 make it go away permanently?
- Resetting the code may temporarily clear the Check Engine light, but if the underlying issue causing the P10E2 code is not addressed, the code is likely to reappear.
9. Can a DIY enthusiast fix the P10E2 code issue in a GMC, or is professional help necessary?
- Depending on your experience and expertise, you may be able to diagnose and repair the P10E2 code yourself. However, if you are unsure or need specialized tools, seeking professional help is recommended.
10. How can regular maintenance help prevent the occurrence of the P10E2 code in a GMC vehicle?
- Regular maintenance, including checking the battery, wiring, and ignition system, can help prevent issues that may lead to the P10E2 code, ensuring the vehicle runs smoothly.
2. What can cause the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage error code in a GMC?
- Possible causes include a faulty bypass relay, damaged wiring or connectors in the circuit, or a weak battery.
3. How can I diagnose the source of the low voltage issue triggering OBDII code P10E2 in my GMC vehicle?
- Use a multimeter to check the voltage at the relay and its connections, inspect the wiring for any damage, and ensure the battery is in good condition.
4. Can a weak battery be a potential cause of the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage error in a GMC?
- Yes, a weak or failing battery can lead to low voltage issues in the circuit, triggering the P10E2 code.
5. Is it safe to continue driving my GMC with the P10E2 code present?
- It is not recommended to drive the vehicle with this code as it can lead to potential stalling and other safety hazards.
6. What are some repair tips for fixing the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage issue in a GMC?
- Repair tips may include replacing the bypass relay, repairing damaged wiring, ensuring proper battery health, and clearing the error code with an OBDII scanner.
7. Can a DIY enthusiast fix the P10E2 code in a GMC, or is professional help recommended?
- Depending on your skill level and access to tools, a DIY enthusiast may be able to address the issue by following repair guides and proper safety precautions.
8. Will resetting the error code using an OBDII scanner solve the underlying issue causing code P10E2 in a GMC?
- Resetting the code may temporarily clear the error, but it is crucial to diagnose and address the root cause to prevent the code from reappearing.
9. How important is it to address the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage error promptly in a GMC?
- It is essential to address the issue promptly to prevent potential starting problems, engine performance issues, and safety concerns while driving.
10. Can extreme weather conditions affect the likelihood of triggering the P10E2 code in a GMC?
- Yes, extreme temperatures can impact battery performance and overall electrical system function, potentially contributing to the low voltage issue triggering the code.
Discuss the causes and fixes for P10E2 GMC OBDII Code
Code P10E2 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
